Re: CP gearbox

[david.anderson]

Can anyone provide dimensions for the kickstart ratchet pinion bush for a CP gearbox, part no 3193-33. In particular the length of the bush and any shoulder on the bush. Draganfly are currently out of stock. Thanks
David

[Vincent.vanGinneke]

my list jumps from 3191-33 to 3194-33.
3194 is 184x the bush, that one ?

[david.anderson]

Vincent
Ops typo there. yes the part no is 3194-33
thanks
David

[Vincent.vanGinneke]

Hello David,


Steel bush:

[david.anderson]

Vincent
thankyou very much, that is just what I need. it will now not take long to make one.
David

[david.anderson]

Vincent
Sorry but wrong bush. I should have looked at your photos.
The bush that I need dimensions for is the bush that goes onto the mainshaft behind the nut, and the ks pinion gear freewheels on it. Just the length and whether there is a stepped shoulder for the spring. If so the shoulder dimensions.
Thanks
David

[Vincent.vanGinneke]

that 'floating' bush that works with a light spring ?

[Vincent.vanGinneke]

this one I think..
No shoulder just a straight piece of 'tube'

not made from PB steel (PisBakkenstaal) urinal steel but something better!

[david.anderson]

Vincent
thanks
yes that is the bush I was after. a quick lathe job will have it.
thanks again
David