Engine shock absorber spring

Singles, twins and fours.
Post Reply
Paul Slootheer
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1034
Joined: Mon Jul 30, 2012 5:47 pm
Contact:

Engine shock absorber spring

Post by Paul Slootheer »

Who knows the exact dimensions of the shock absorber spring of a 50’s single cilinder. So inner- and outer diameter, thickness and overall lenght. I just purchased one but is seems to big… :twisted: :twisted:
Attachments
IMG_4350.jpeg
1953 Ariel VB project - 1950’s Rigid Matchless G3L project
User avatar
Roger Gwynn
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2189
Joined: Tue May 28, 2013 11:34 am
Location: Norwich, UK
Contact:

Re: Engine shock absorber spring

Post by Roger Gwynn »

Square section springs are stiffer than the equivalent round wire ones. it will be a bit of struggle to get the nut on with a new spring but should be possible without recourse to cable ties and bits of string. I don't have dims though
Roger Gwynn, caretaker of the club's works drawings and machine register, membership secretary 2015-26. Director of AOMCC, Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired. (roger@arielownersmcc.com)
Paul Slootheer
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1034
Joined: Mon Jul 30, 2012 5:47 pm
Contact:

Re: Engine shock absorber spring

Post by Paul Slootheer »

Roger although its seems to fit onto the sliding member, it it looks to big in outer diameter on the end plate. The spring is not laying within the edge of the spring retaining plate but more on top… is this common?
Attachments
IMG_4351.jpeg
1953 Ariel VB project - 1950’s Rigid Matchless G3L project
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest