Intro
-
nevhunter
- Holder of a Platinum Anorak
- Posts: 5393
- Joined: Tue May 10, 2011 9:42 am
- Location: Victoria.. Australia.
- Contact:
Re: Intro
Most Makes are tension wire to advance. Rudges can be the exception.. I use Points open (Cigarette paper moves) at FULL advance is 35 Degrees Before TDC on a dial. Get TDC more precisely by taking the Piston a fixed distance accurately say 1" both ways and bisect the two positions. You need full advance when you are revving it out or the Pipe will show Blue. Nev.
-
paul.jameson
- Holder of a Golden Anorak
- Posts: 3128
- Joined: Wed Oct 12, 2011 3:04 pm
- Location: Herefordshire
- Contact:
Re: Intro
Hello Paul,
My apologies for not spotting your postings earlier. I can assist you as necessary with your Ariel and live near Malvern. My contact details are on the inside front cover of Cheval.
Paul
My apologies for not spotting your postings earlier. I can assist you as necessary with your Ariel and live near Malvern. My contact details are on the inside front cover of Cheval.
Paul
Paul Jameson
34 OHC 4F 600 (project), 35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
34 OHC 4F 600 (project), 35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
Who is online
Users browsing this forum: No registered users and 0 guests