Cheers Paul placed order this morning thanks Pete

Cheers for that, ill give them a ring tomorrow hopefully they will have them thanks Pete

Thanks, I don’t think Burlen do Solex. the jet for the later solex
Are not the same as the older jets, I believe the air correction jets
are one peace with the emulsion tube and the main jets are 6mm
thread the older are 5mm I think. There used to be a fellow who supplied
the jets, but I under ...

Hi hoping some one my know the answer to my question, always had trouble with the solex on my sq4,it runs on the rich side.
I’ve put washers under the float valve, total 4mm, but it’s not a lot better. So I've set about making main jets and air correction jets, at the moment its fitted with a 120 ...

I am making one at the moment, I am copying one off my mate’s bike, witch he tells me is original, and it’s same as the one in the photo. It’s made of ½ dia tube, but not got the middle leg, just front and back
Pete

Hi Wade yes has threads, just screws in, no pinch bolt to stop it unscrewing like the later caps

Hi Wade
Pictures of float bowl parts, think that’s what you wanted
Pete

Hi Wade
If I have chance I will take a couple of photos of the inside, the needle
and the connector. If you need any more pictures or any info just ask
Pete

20210131_183751_resized.jpg Hi
The reason I thought it was the same, is the previous owner had held the bottom while trying to undo the top, and bent the bottom and split the solder. One of the fittings in the bottom had been fitted to hold the arm in place before it was soldered it took 2 day ...

It’s exactly same as the Amal on my 1932 matchless silver hawk
Pete