Page 16 of 16

Re: Ariel SB/1932 and SF 1931 my new project

Posted: Sun Apr 12, 2026 4:34 pm
by Karol Burger
we are already driving :D

Re: Ariel SB/1932 and SF 1931 my new project

Posted: Sun Apr 12, 2026 5:04 pm
by Vincent.vanGinneke
The smile tells it all !

Re: Ariel SB/1932 and SF 1931 my new project

Posted: Wed Aug 26, 2026 1:25 pm
by Karol Burger
report on the condition of the motorcycle after a short period of time. I had to install an oil shut-off valve because after a long time the oil was leaking into the engine blocks and the motorcycle was smoking a lot when I started it.

https://www.arielklub.sk/inzerat-26222- ... toku-oleja

Re: Ariel SB/1932 and SF 1931 my new project

Posted: Wed Aug 26, 2026 1:30 pm
by Karol Burger
I also bravely tried to participate in the Austrian Rally. However, the hills really took a toll on the bike. Both valves were slightly seated and the valve clearance was lost, which caused them to not seal well and the motorcycle overheated a lot and did not have enough power for the Austrian hills.

Re: Ariel SB/1932 and SF 1931 my new project

Posted: Wed Aug 26, 2026 1:35 pm
by Karol Burger
Among other problems I can mention that the spokes of the rear wheel came loose and the bike started to float a bit and also that there were some oil leaks. Otherwise it was pretty good. I am currently working on fixing the problems. :D :D :D

Re: Ariel SB/1932 and SF 1931 my new project

Posted: Wed Aug 26, 2026 2:56 pm
by Vincent.vanGinneke
But you have the pictures :lol:

Re: Ariel SB/1932 and SF 1931 my new project

Posted: Thu Aug 27, 2026 2:55 am
by nevhunter
I always give the exhaust valves on a Sidevalve a few thou more that originally recommended.The valves get hotter than OHV ones, The exhaust Pipes BLUE more as well. Try to keep the Back pressure to a minimum in the Muffler. Nev