mag removal

[Richard Woolnough]

Peter tried to reply to you on email but the server rejected my message? any way all done and payment sent, thank you

[pete.collings]

Hi Richard email received, extractor packed up and ready to post.

[Richard Woolnough]

managed to get the sprocket off yesterday and following a pretty exhausting, expleted deleted, morning got the mag off today. p/o had replaced the mountings with 3/8 bolts but still pretty awkward, just musing should I obtain a piece of 3/8 hex I could make some extended bolt heads which woud make accessibility a tad more easy, any views appreciated although I don't anticipate more removal at my age, thanks to all who contributed and Pete for the puller.
Kind regards
R

[Richard Woolnough]

well made me 3 bolts having obtained a short length of material on ebay, made the heads 1" deep, see what happens when the mags rebuilt and I go to install it, if they are to long can always spin 'em down in the lathe.

[Julian Murphy]

I used 3 x cap heads and a ball ended allen key.

Much easier.

Write up somewhere on here. Do a search.