Search found 20 matches

by rogerlee
Sat Nov 14, 2026 9:56 am
Forum: Two stroke
Topic: Ariel arrow
Replies: 12
Views: 303

Re: Ariel arrow

Hl Brian Flatland Roger here,T 858 is not shown on the Ariel spares book,it goes between t 837 and t 836,The dimensions of spacer in my language is 0.933" O.D, 0.671" I.D, and 0.341" wide,Hope this helps,Flatlander lives on,
by rogerlee
Wed Feb 21, 2024 9:19 am
Forum: Two stroke
Topic: Leader Indicator Switch Lock Nut
Replies: 2
Views: 2453

Re: Leader Indicator Switch Lock Nut

Hi Jeffl The standard lock nut is 9/16 " diam.26 tpi 0.709" across flats,0.100" wide,Its a bsb standard brass rate nut.Hoping this helps flatland Roger
by rogerlee
Sat Jan 13, 2024 2:29 pm
Forum: Two stroke
Topic: Synthetic OK?
Replies: 5
Views: 2830

Re: Synthetic OK?

Hi John,For once I will half agree with Roger,After running these engines for 30 years I have settled for running the first 500 hundred on mineral oil to get the rings to bed in,The next 500 hundred on semi synthetic ,Then fully synthetic at 32 to one from then on ,Yes its £5 a litre extra on ...
by rogerlee
Wed Jan 26, 2022 7:43 pm
Forum: Two stroke
Topic: Thread sizes
Replies: 4
Views: 1941

Re: Thread sizes

HI Roy,Roger G is half right,A standard 5/16 unc bolt is used,but the first 1/2 inch of the bolt is turned down to 1/4 inch with a 1/4 unc thread making it a shouldered bolt to stop you punching a hole through the end covers,Roger Lee and out
by rogerlee
Tue Nov 17, 2020 2:26 pm
Forum: Two stroke
Topic: Anti-squeal springs
Replies: 6
Views: 2995

Re: Anti-squeal springs

Hi Will,Not much of a problem,If you have John Ellis little book of spot the difference no. 13 it gives a good picture of them fitted,The way I remove them is with a 10 inch screw driver with a small slot ground in the blade,Position the blade between the brake shoe and the hook end of the spring ...
by rogerlee
Tue Nov 17, 2020 2:26 pm
Forum: Two stroke
Topic: Anti-squeal springs
Replies: 6
Views: 2995

Re: Anti-squeal springs

Hi Will,Not much of a problem,If you have John Ellis little book of spot the difference no. 13 it gives a good picture of them fitted,The way I remove them is with a 10 inch screw driver with a small slot ground in the blade,Position the blade between the brake shoe and the hook end of the spring ...
by rogerlee
Sat May 23, 2020 8:23 am
Forum: Two stroke
Topic: Arrow seat
Replies: 1
Views: 1484

Re: Arrow seat

Hi Ivor,Its Pete Barlet at Yeovil,I can vouch for him,No problem with him,Yes the seats are ok,I think John Ellis had one.Roger and out
by rogerlee
Tue Dec 10, 2019 10:35 am
Forum: Two stroke
Topic: Leader front brake cable
Replies: 2
Views: 2005

Re: Leader front brake cable

Hi Pete,Yes its a mine field,there were four different lengths for the Leaders and Arrows,Early type pre A frame 3t 6inch Leader and 3ft 9inch Arrow, 1959 to 1960.Then A frame type 3ft 8 inch Leader 4ft Arrow 1961 to 1965.So yours will be a T1164 romac no TS 799 .I make mine 3ft 8 1/2 inchs just to ...
by rogerlee
Wed Dec 04, 2019 9:03 am
Forum: Where is it now ? What was it then?
Topic: 215ARW Ariel Arrow Cafe Racer
Replies: 3
Views: 4246

Re: 215ARW Ariel Arrow Cafe Racer

Hi Roger,Give John Ellis a ring he restored this bike 215 arw about four years ago and sold it on,we have a photo after resoration.Flatland Roger
by rogerlee
Wed Oct 16, 2019 8:57 am
Forum: Two stroke
Topic: ARROW/LEADER ELECTRIC START CONVERSION
Replies: 4
Views: 6856

Re: ARROW/LEADER ELECTRIC START CONVERSION

Hi Terry,As Brian H has said we will be on the Leader/Arrow stand S12 in the old Auction room,I have converted 6 of my own bikes engines to my design,The first starter engine was done in 2002 has has proved faultless for 30,000 miles.I will have a little fact sheet of the specifications if you want ...