Page 1 of 2
1927 Model A rear plate
Posted: Fri Mar 28, 2014 5:29 am
by Richard Kal
Hi All,
I lack a rear number plate for this bike. Can someone help out with something suitable? I will be fitting a tail light, but will accept a plate without the light.
Thanks,
Richard
Posted: Fri Mar 28, 2014 2:46 pm
by brenton.roy
I could make a cardboard template?
Posted: Fri Mar 28, 2014 10:27 pm
by Richard Kal
Brenton,
Yes please; that would be much appreciated.
Thanks,
Richard
Posted: Wed Apr 09, 2014 2:02 pm
by brenton.roy
Sorry Richard. brain went into neutral. I will have a go this weekend.
Posted: Thu Apr 10, 2014 9:02 am
by Richard Kal
Thanks Brenton!
Posted: Fri Apr 25, 2014 8:54 am
by brenton.roy
Well, one weekend...
It's just cut from thin plate steel.
All three bolts are to the guard. The top two bolt through the carrier bracket.
Posted: Fri Apr 25, 2014 11:25 am
by Richard Kal
Thanks;much appreciated!
Re: 1927 Model A rear plate
Posted: Mon Apr 28, 2014 5:47 pm
by magne.aga
Richard Kal wrote:Hi All,
I lack a rear number plate for this bike. Can someone help out with something suitable? I will be fitting a tail light, but will accept a plate without the light.
Thanks,
Richard
Think this is it
http://www.ebay.com/itm/NEW-ARIEL-MOTOR ... a0&vxp=mtr
brgs Magne
Posted: Mon Apr 28, 2014 11:44 pm
by Richard Kal
Thanks Magne;
One is now on its way to Western Australia!
Richard
Re: 1927 Model A rear plate
Posted: Tue Apr 29, 2014 9:41 am
by john.deeth
Richard Kal wrote:Thanks Magne;
One is now on its way to Western Australia!
Richard
That number plate holder is a bit late for your bike Richard.
I think Josef the Czech fellow makes the correct one.
Cheers,
John.