Page 1 of 1
1929 Rocker levers
Posted: Mon Nov 24, 2025 12:08 pm
by FPButer
Hello Hello,
For the rebuild of a 1929 500 OHV I am searching for the rocker levers, partnumbers:
A6/432 and A6/433
If it would be available in a joblot than that would be of interest aswell.
Best regards,
Rik
Re: 1929 Rocker levers
Posted: Mon May 04, 2026 12:02 am
by j.coleman
Sven down on the isle of wight is getting prices for having some made, he has been looking for a long time, as have I. Sven posted in the sheval this latest copy in a last ditch attempt before going for new ones. We will get them on the road! Don't give up. Jim
Re: 1929 Rocker levers
Posted: Mon May 04, 2026 6:28 am
by nevhunter
IF you are stuck the Later ones will fit you just have 2 Possible adjustments for each valve. Valve stem length stays the same and all will work ok.
Re: 1929 Rocker levers
Posted: Mon May 04, 2026 9:58 am
by tony.barnett
nevhunter wrote: Mon May 04, 2026 6:28 am
IF you are stuck the Later ones will fit you just have 2 Possible adjustments for each valve. Valve stem length stays the same and all will work ok.
I thought the same, particularly for a plate supported rocker set up like a 29. Make some spacers and fit later rockers.
Re: 1929 Rocker levers
Posted: Mon May 04, 2026 10:01 am
by nevhunter
You haven't permanently Altered anything and enables setting up the valve Lifter More accurately. Nev