Re: Backfire
Posted: Mon Jan 11, 2016 1:09 am
I've made some progress. I moved the carb forward but had to use 5/16 bolts as the studs would not allow the carb with the flame trap on to be installed.
There is little room left between the flame trap and oil tank maybe 3/16 .
The float bowl from a Lister motor works perfect as this allows the bowl to be positioned away from the flame trap and still clears the Generator.
Should be good for this year.
There is little room left between the flame trap and oil tank maybe 3/16 .
The float bowl from a Lister motor works perfect as this allows the bowl to be positioned away from the flame trap and still clears the Generator.
Should be good for this year.