I started work on my VB lately. To replace the valve springs I need a propper valve spring compressor for a sidevalve engine. Does anyone have that tool spare or could point me where to find one?
Thanks
Regards Klaus
(kl_gerhard@gmx.de)
Wanted: Valve spring compressor side valve
-
klaus gerhard
- Holder of a Waxed Cotton Anorak
- Posts: 349
- Joined: Tue Nov 01, 2011 8:18 am
- Location: Erlangen, Germany
- Contact:
-
Roger Gwynn
- Holder of a Golden Anorak
- Posts: 2089
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: Wanted: Valve spring compressor side valve
Difficult, I found a couple on ebay but neither are particularly good.
Roger Gwynn, caretaker of the club's works drawings and machine register, membership secretary 2015-26. Director of AOMCC, Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
-
Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4888
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
Re: Wanted: Valve spring compressor side valve
I made one from a old wood clamp 
you can borrow it, but pretty heavy.
edit, Oh, for taking the springs off this worked o.k.
For putting them back on there was initially very little room to slide the foot of the woodclamp in between valve spring and the opening on the cylinder chest.
I did get around it somehow but it was not a straightforward job.
you can borrow it, but pretty heavy.
For putting them back on there was initially very little room to slide the foot of the woodclamp in between valve spring and the opening on the cylinder chest.
I did get around it somehow but it was not a straightforward job.
-
Roger Gwynn
- Holder of a Golden Anorak
- Posts: 2089
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: Wanted: Valve spring compressor side valve
I have a nice Terry's one but it needed modifying. I have thought of making some as a little project.
Terry's on the left
6631-37 genuine Ariel, for a SQ4
Roger Gwynn, caretaker of the club's works drawings and machine register, membership secretary 2015-26. Director of AOMCC, Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
-
klaus gerhard
- Holder of a Waxed Cotton Anorak
- Posts: 349
- Joined: Tue Nov 01, 2011 8:18 am
- Location: Erlangen, Germany
- Contact:
Re: Wanted: Valve spring compressor side valve
Thanks for the advice. I will try to modify an old clamp, if I cant find a decent one. A valve spring compressor for a OHV engine I have for years. Just never needed a SV compressor up to now!
-
paul.jameson
- Holder of a Golden Anorak
- Posts: 3200
- Joined: Wed Oct 12, 2011 3:04 pm
- Location: Herefordshire
- Contact:
Re: Wanted: Valve spring compressor side valve
Try googleing Austin 7 valve spring compressor and you will find a selection of sidevalve spring compressors.
Paul Jameson
34 OHC 4F 600 (project), 35 LG 250, 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
34 OHC 4F 600 (project), 35 LG 250, 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
-
klaus gerhard
- Holder of a Waxed Cotton Anorak
- Posts: 349
- Joined: Tue Nov 01, 2011 8:18 am
- Location: Erlangen, Germany
- Contact:
Re: Wanted: Valve spring compressor side valve
Will have a look! Thanks
Who is online
Users browsing this forum: No registered users and 0 guests