VB build
-
- Holder of a Silver Anorak
- Posts: 849
- Joined: Mon Jul 30, 2012 5:47 pm
- Contact:
Re: VB build
Interesting tale. Allways nice when objects come to you with a certain story!
- Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1446
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: VB build
Lovely story, I suspect that none of us passes a skip without looking inside. We were once having a big clear out at Draganfly and had a skip in the yard that was being slowly filled with rubbish and scrap parts. It was very slow because as soon as we threw something in, someone, mainly Bruce, would take it out again!
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
-
- Holder of a Silver Anorak
- Posts: 849
- Joined: Mon Jul 30, 2012 5:47 pm
- Contact:
- Karol Burger
- Holder of a Silver Anorak
- Posts: 967
- Joined: Mon Jul 30, 2018 7:08 am
- Location: Rudinka/ Slovensko
- Contact:
Re: VB build
I'm afraid of that, so I always check for unnecessary parts during the Christmas holidays and either put them up for sale or offer them to a scrapyard.Paul Slootheer wrote: ↑Sat Nov 23, 2024 1:10 pm To be honest, I suspect deep down in all of us there’s a hoarder hiding…
Ariel 500 E - 1927 /Ariel SF-1931 ,Ariel SB - 1932 / Ariel 4F6 - 1932, 1934 , 1935, 4G 1000-1939/ KG500-1948 AOMCC Slovakia Branch Secretary
https://www.arielklub.sk/
https://www.facebook.com/groups/322716757874756
https://www.facebook.com/ArielKlub.sk
https://www.arielklub.sk/
https://www.facebook.com/groups/322716757874756
https://www.facebook.com/ArielKlub.sk
- fpassmore
- Holder of a Waxed Cotton Anorak
- Posts: 498
- Joined: Mon Aug 27, 2012 2:05 am
- Location: Kamloops, BC, Canada
- Contact:
Re: VB build
Hah we are all guilty of having too much stored away
'51 SQ4, '56 NH, '56 VH, '37 VH500 Red Hunter, '56 SQ4 (on the bench),'49 Sq4 (basket case), '48 A7 BSA Twin, 10 other BSA's, 7 Norton's, 2 Triumph's, 2 Ducati's and 3 Japanese. Just crazed is all my problem is.
- Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4463
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
Re: VB build
Back to the build.
Picked up the other (better) cilinder, new Std. liner, valves and guides.
Surface skimmed, yummie!
Good for another 70+ years, Now I can get on with the fun
Picked up the other (better) cilinder, new Std. liner, valves and guides.
Surface skimmed, yummie!
Good for another 70+ years, Now I can get on with the fun
-
- Holder of a Nylon Anorak
- Posts: 268
- Joined: Thu Jan 10, 2013 9:43 pm
- Location: Hurstbourne Tarrant, Andover, Hants.
- Contact:
Re: VB build
Ah, that so beautiful. Perhaps you should use it as a paperweight rather than get it dirty on a bike.
That said, (and I hesitate to offer advice to m'Learned Friend) you have cleaned out the hole behind the exhaust port that's just below the 4th fin down from the top, haven't you. It easily fills with dirt and dead spiders. On my barrels it's about 5.5mm diameter and I've opened it out to 6.5mm (1/4 inch in proper units) using a masonry drill carefully. (I've found the latter necessary 'cos of the sand in the metal from its initial casting.) This cooling hole isn't on other sidevalves that I know and if you fit a VH cam, well, you need all the cooling you can get.
This hole isn't on the BSA M20 and long ago and far away when I was a teenager and knew all the answers to everything I fitted Gold Star racing cams into my M20. With an empty silence it would CRUISE at 60 - but not for long before the exhaust valve failed.
Regards from MikeN.
That said, (and I hesitate to offer advice to m'Learned Friend) you have cleaned out the hole behind the exhaust port that's just below the 4th fin down from the top, haven't you. It easily fills with dirt and dead spiders. On my barrels it's about 5.5mm diameter and I've opened it out to 6.5mm (1/4 inch in proper units) using a masonry drill carefully. (I've found the latter necessary 'cos of the sand in the metal from its initial casting.) This cooling hole isn't on other sidevalves that I know and if you fit a VH cam, well, you need all the cooling you can get.
This hole isn't on the BSA M20 and long ago and far away when I was a teenager and knew all the answers to everything I fitted Gold Star racing cams into my M20. With an empty silence it would CRUISE at 60 - but not for long before the exhaust valve failed.
Regards from MikeN.
- Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4463
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
Re: VB build
I think I have been there and done that
But I'll double check !
Answer to earlier post by Paul,
This (other) 'De Ridder' WNG frame did not came via Carlo Jusche but was found on the attic of a farm in the Northeastlowland
in Dutch : Noordoostpolder
But I'll double check !
Answer to earlier post by Paul,
This (other) 'De Ridder' WNG frame did not came via Carlo Jusche but was found on the attic of a farm in the Northeastlowland
in Dutch : Noordoostpolder
Who is online
Users browsing this forum: No registered users and 1 guest