Thanks again Mick. Your method of replacing the felt wick sounds very good. I do have an old rubber sleeve from a Dremel sanding drum.
Regards,
Paul

Thank you Simon, Mick and Dave,
Simon had asked about the size of the leak. I normally get about a 1 to 2" puddle after a 45 minutes ride. My Draganfly parts catalogue and manuals do not show a picture or give a parts # for this 'felt wick' . I believe it's just under the oil tank tap and provided I ...

Hello everyone,
I'm relatively new to the forum. I have a '56 Huntmaster and have been trying to eliminate excessive oil draining from the rear enclosed chain case.
I would be happy just to oil the rear chain with a can of spray lube. I have tried blocking the oil line that leads from the bottom of ...

simon.holyfield wrote: Sat Oct 29, 2022 10:01 pm The standard feet are pretty thin - there's a lot of weld in mine.

Thanks for this Simon. It's become apparent to me that the feet on my center-stand will need some repairing .. to make them function properly ; without a lot of strain.

Hi

I hve to agree with most of what's been said above, I find my FH to be the easiest of my classic twins to put onto the centre stand. I use much the same technique as others though I've recently changed from my left hand on the handlebar to under the front of the dual seat, (I find it easier ...

Paul,

The feet on centre stands are easily damaged and some repairs are not as good
as original.

image_8.JPG
This shows the foot on a good stand just as it touches the ground


image_9.JPG
This shows the stand supporting the bike

The best way to get the bike off the stand is to do it from ...

Welcome to the forum.

I had to think how I do it but I've always considered the swinging arm Ariels to be one of
the easier British bikes to put on the centre stand.

I stand at the drive side of the bike and take the left handlebar with my left hand and grip
the frame of the bike at the back ...

JohnnyBeckett wrote: Fri Oct 28, 2022 7:06 pm hi i have also welded a little peg on the stand to put your foot on the sand to push it down

Thanks Johnny. That sounds like it would make things a lot easier.

Paul
Maybe see Jim Haydock's posts towards the end of this thread (started by Johnny I think!) - he's made a couple of easy mods :
http://forum.arielownersmcc.com/viewtopic.php?f=21&t=11437&start=10

SG

These mods look good. Thanks Simon. The extension on the foot looks like it would be very ...

If you pull on the handlebars don't be tempted to lift as well - there is no need
as the front wheel will roll back and should stay on the ground when the bike is
on the stand. All the left hand needs to do is steady the bars and stop them
from trying to turn which they will do.

Thanks Will ...