KH500 rigid/plunger front engine plates

Post by **john.nash** » Thu Apr 19, 2012 4:18 pm

Cannot find any pictures of these ?
Allegedly they are the "curved ones" ..

I can get an engine for the frame but not the plates ...

Not held by the Club, Drags nor John Budgen ...

Post by **brenton.roy** » Thu Apr 19, 2012 11:23 pm

Hi Josh,
I have some somewhere, but I'm not sure exactly where. I'll start looking.
Brenton

Post by **nevhunter** » Fri Apr 20, 2012 12:20 am

They are curved at the front till they almost meet. Nrv

adrie.degraaff · Post by **adrie.degraaff** » Fri Apr 20, 2012 6:56 am

You'll probebly know that a twin frame is differend from a single.

Post by **dave.owen** » Fri Apr 20, 2012 7:42 am

If to do make them John, there are spacers behind the plates where they meet the down tube

Dave

Post by **nevhunter** » Fri Apr 20, 2012 10:12 am

A twin frame is also made from thinner tube.(wall thickness) in some places. Nev

Post by **Graham.Goral** » Fri Apr 20, 2012 12:51 pm

I have some lying around which I can make a drawing of if that helps? The only non-straightforward part of making a pair would be to replicate the compound curves around the front and upper edges but another Lancs Branch member has had some made by welding extra metal onto flat plates and they look passable. Can post pics in any case.

Post by **john.nash** » Fri Apr 20, 2012 2:14 pm

please please please please

Dave Pitt ha just told me that he has been looking, on and off, for years for a set ....

adrie.degraaff · Post by **adrie.degraaff** » Fri Apr 20, 2012 2:46 pm

I think end to end Fred has a spare set.

Post by **john.nash** » Fri Apr 20, 2012 2:55 pm

NO really ?
Send me his email ... please please please ..

Ariel Owners Motorcycle Club

Ariel Owners Motorcycle Club

KH500 rigid/plunger front engine plates

KH500 rigid/plunger front engine plates

Re: KH500 rigid/plunger front engine plates

Re: KH500 rigid/plunger front engine plates

Who is online