W/NG Rack
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
W/NG Rack
Hi fellows
I live so far in Argentina and the shipping cost are high to buy a Repro Pannier Rack
I make and easy drawing and i need measurements to make my own rack.
They should only measure the length of each red line named with a letter. If possible, the angle shown in the drawing.
I will greatly appreciate the measures that you can send me.
Also i need the thickness of the bar.
Thanks in advance!
I live so far in Argentina and the shipping cost are high to buy a Repro Pannier Rack
I make and easy drawing and i need measurements to make my own rack.
They should only measure the length of each red line named with a letter. If possible, the angle shown in the drawing.
I will greatly appreciate the measures that you can send me.
Also i need the thickness of the bar.
Thanks in advance!
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
Re: W/NG Rack
Grahan Goral from Facebook Ariel Motorcycle Group help me with all measurement i need to make this rack!
https://www.facebook.com/groups/2809984 ... &ref=notif
A = 430mm measured along top between rear of rack and theoretical intersection point
B = 300mm measured along top between theoretical intersection point and end of mounting lug
C = 475mm measured along underside between welded joint and end of mounting lug
D = 130mm along tube between welded joint and end of mounting lug
(distance between mounting lugs = 150mm)
E = 130mm between centres
F = 130mm between centres
G = 160mm between centre of mounting lug and centreline of tube
(Pannier mounting lugs 140mm between centres)
H = 220mm between centres
Tube diameter = 12.7mm
Angle = 52 degrees (ie. sloping tube is 38 degrees from horizontal)
https://www.facebook.com/groups/2809984 ... &ref=notif
A = 430mm measured along top between rear of rack and theoretical intersection point
B = 300mm measured along top between theoretical intersection point and end of mounting lug
C = 475mm measured along underside between welded joint and end of mounting lug
D = 130mm along tube between welded joint and end of mounting lug
(distance between mounting lugs = 150mm)
E = 130mm between centres
F = 130mm between centres
G = 160mm between centre of mounting lug and centreline of tube
(Pannier mounting lugs 140mm between centres)
H = 220mm between centres
Tube diameter = 12.7mm
Angle = 52 degrees (ie. sloping tube is 38 degrees from horizontal)
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
-
- Holder of a Platinum Anorak
- Posts: 5052
- Joined: Tue May 10, 2011 9:42 am
- Location: Victoria.. Australia.
- Contact:
Re: W/NG Rack
According to the parts book number, that rack only dates back to 1940. Nev
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
Re: W/NG Rack
Hi Nev
The Parts Manual according to my frame number you can see this rack
![Image](https://www.milsurps.com/images/imported/2018/02/db3602d0de4686caa2290b54b30890be-1.jpg)
![Image](https://www.milsurps.com/images/imported/2018/02/4431b6fb066035a20552e0df29ff29a0-1.jpg)
![Image](https://www.milsurps.com/images/imported/2018/02/9af9a3b50081ca080f34d1442ec98459-1.jpg)
The Parts Manual according to my frame number you can see this rack
![Image](https://www.milsurps.com/images/imported/2018/02/db3602d0de4686caa2290b54b30890be-1.jpg)
![Image](https://www.milsurps.com/images/imported/2018/02/4431b6fb066035a20552e0df29ff29a0-1.jpg)
![Image](https://www.milsurps.com/images/imported/2018/02/9af9a3b50081ca080f34d1442ec98459-1.jpg)
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4700
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: W/NG Rack
That's the rack that comes with the pannier frames, fitted from '42? The earlier rack is more like a civilian one.
The rack Luis shows is missing from my original January 1942 parts book.
The rack Luis shows is missing from my original January 1942 parts book.
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
-
- Holder of a Platinum Anorak
- Posts: 5052
- Joined: Tue May 10, 2011 9:42 am
- Location: Victoria.. Australia.
- Contact:
Re: W/NG Rack
My parts list is May 1941. Complete carrier Number 5630-40. This is closed at the front and has not got the extra mount points for the pannier frames. The note in the parts book says do not use E9/896 which it presume is a civilian one. 5630-40 was only used for a bit more than a year, it appears.. Nev
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
Re: W/NG Rear Carrier
Thanks to the measures shared here in the forum, I started building the rear carrier. My rear fender has missing parts, such as the hinge, which I will have to rebuild. I'm newby to iron folding and welding, so I have mistakes to correct even ...
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_114345.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_141021.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_150221.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_150341.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_160224.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200131_123934.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_114345.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_141021.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_150221.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_150341.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200124_160224.jpg)
![Image](http://www.surfacezero.com/g503/data/4406/medium/20200131_123934.jpg)
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
-
- Holder of a Golden Anorak
- Posts: 2382
- Joined: Sat Jul 07, 2018 5:39 pm
- Contact:
Re: W/NG Rack
HI I think you are making a very good and nice job of that rack and i think it is better made then one you would buy and your one you knows your one fits keep up the good work
![Smile :)](./images/smilies/icon_e_smile.gif)
![Cool 8-)](./images/smilies/icon_cool.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
- Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4312
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
Re: W/NG Rack
Good Job Luis !
Who is online
Users browsing this forum: No registered users and 21 guests