I know that alternator output can be increased by connecting 2 of three wires together, and connecting these across a regulator/ rectifier unit for 12 volts DC.
My question is , which of the two wires out of three to connect? I have green / yellow, green/white and green/black.
Thanks
Alan
Increasing alternator output ariel arrow
-
keith.mettam
- Holder of a Waxed Cotton Anorak
- Posts: 515
- Joined: Wed Mar 02, 2011 1:46 pm
- Location: Kent UK
- Contact:
Re: Increasing alternator output ariel arrow
Hi Alan,
Read the attached pdf, second bit entitled '6 to 12v conversion'. This will be the way to wire your modern 12v single phase rectifier/regulator. The wiring will be the same for any single phase rectifier/regulator modules with two yellow input wires.
All the best,
Keith.
Read the attached pdf, second bit entitled '6 to 12v conversion'. This will be the way to wire your modern 12v single phase rectifier/regulator. The wiring will be the same for any single phase rectifier/regulator modules with two yellow input wires.
All the best,
Keith.
Re: Increasing alternator output ariel arrow
Perfect! Just what I needed. Thanks Keith
Cheers Alan
Cheers Alan
Who is online
Users browsing this forum: No registered users and 15 guests