Page 1 of 1

Paul Jameson article on cams and followers

Posted: Tue Dec 24, 2013 12:02 am
by ron.herring
My attempts to access the document is continually being rejected despite repeatedly inputting my correct user name and password. Is there a reason for this?

Posted: Tue Dec 24, 2013 2:27 am
by brenton.roy
Hi Ron,
No, there's no reason. I checked and it downloaded for me.
Are you using the club members username and password from a recent Cheval magazine?
The file is a bit over 7mb, so might take a little while if you have a slow internet connection.
Brenton

Posted: Tue Dec 24, 2013 10:45 pm
by ron.herring
Hi Brenton
On reading your response to my query I tried again, and was still blocked. I'm repeating the same user name and password that I get into this forum with, - it gets me into the forum, but it seems no further. Surely it doesn't require additional authorisation? I would be grateful if someone can tell me what else I have to do.
The Cheval magazine you mention is not known to me - I registered directly with this AOMCC forum, submitted my selection for user name and password, and duly received authorisation
Ron

Posted: Wed Dec 25, 2013 1:29 am
by brenton.roy
Hi Ron,
That explains it. Yes, there is a different password for the club resources.
The forum is a free resource, but the main website and library are part of AOMCC membership. There is a section of the forum that can only be seen by club members.
My two cents is that it is well worth the money. The library is very extensive.
Cheval De Fer is the (extremely well written) AOMCC monthly magazine.
The password for the website is shown inside the magazine cover.
Regards, Brenton

Re: Paul Jameson article on cams and followers

Posted: Wed Jan 08, 2014 6:59 am
by admin
missed this (thanks brenton)

Posted: Wed Jan 08, 2014 11:21 am
by brenton.roy
No problems. I aim to please.
Ron is working with our David on cam / valve train stuff. Over my head, but it sounds interesting.
David may have something to report in due course.

Posted: Sun Aug 10, 2014 7:38 pm
by neil.grant
I am still waiting for a copy of Cheval De Fer. I have only been a member since mid July, perhaps that's why. I am keen to get a copy so that I can go ahead with getting my Huntmaster issued with it's original registration number. I have got the original log book, but still waiting for the log book to be issued with my name and address. The original log book has the old registration number. I tried to get on to this with my club membership username and password to no avail. How often do these mags come out ? neil.grant

Posted: Sun Aug 10, 2014 8:49 pm
by keith.mettam
Hi Neil and welcome to the AOMCC. My copy of Cheval has only just arrived so you should get yours now sometime (assuming you are a UK member). I think you can go to the AOMCC Home Page and click on 'About The Bikes' then from the drop-down menu select 'Machine Registration' which, hopefully, will give you access to the information you need to help with getting your machine registered again. There are documents there to download, depending on your situation. I have done this without logging into the members section so it seems to be available to all. If this doesn't work for you or is not what you want then you may be able to pm Paul Jameson through this forum to obtain the information you require or, if not, try contacting John Nash (admin) by forum pm, I'm sure he will help you.
Good luck with it Neil,
Regards, Keith.
PS. Have added the registration link for you so try this :-
http://www.arielownersmcc.com/dating.html

Re: Paul Jameson article on cams and followers

Posted: Mon Aug 11, 2014 10:39 pm
by admin
THanks Keith

Indeed you can use the dating link to get information on registering your bike.

If you want to mail me your membership no, Neil, then I can let you have the members area user/password.
If you have the magazine, then it's top of the page on the inside cover.

cheers

John