'29 bitser racer...
- barry.swanson
- Holder of a Nylon Anorak
- Posts: 274
- Joined: Sat Mar 05, 2011 10:45 pm
- Location: New Zealand, BOP.
- Contact:
'29 bitser racer...
I've been slowly piecing together a vintage racer from a ute -load of parts which included 4 frames in varying stages of degradation, I bought about 4 years ago...as you can see from the photo, nothing has been easy but I'm enjoying the challenge of trying to resurect a bike from discarded bits.
Also, as there's a bit of choping and modification involved in a hotrod, I don't have the same feelings of guilt I would if I had started with a complete bike.
The engine had sat for years, was probably a piston seizure that lead to its demise, and the rings have since rusted themselves to the barrel which will need to be relined.
Also, as there's a bit of choping and modification involved in a hotrod, I don't have the same feelings of guilt I would if I had started with a complete bike.
The engine had sat for years, was probably a piston seizure that lead to its demise, and the rings have since rusted themselves to the barrel which will need to be relined.
- Attachments
-
- A bit of a siezure....JPG (56.38 KiB) Viewed 5110 times
- chris.vredenbregt
- Holder of a Waxed Cotton Anorak
- Posts: 450
- Joined: Sun Feb 27, 2011 1:37 pm
- Location: the netherlands
- Contact:
Re: '29 bitser racer...
can't wait to see the result,make something nice out of it ......chris
black ariel model G special 1930 500 OHV
- barry.swanson
- Holder of a Nylon Anorak
- Posts: 274
- Joined: Sat Mar 05, 2011 10:45 pm
- Location: New Zealand, BOP.
- Contact:
Re: '29 bitser racer...
...you and me both Chris...my work rate is not that rapid and I nolonger speculate on a year of completion...chris.vredenbregt wrote:can't wait to see the result,make something nice out of it ......chris
-
- Holder of a Golden Anorak
- Posts: 1837
- Joined: Sun May 22, 2011 2:10 pm
- Location: Brisbane QLD
- Contact:
Re: '29 bitser racer...
I hope the scrutineers don't spot that its powered by an electric drill.Regards John.
- barry.swanson
- Holder of a Nylon Anorak
- Posts: 274
- Joined: Sat Mar 05, 2011 10:45 pm
- Location: New Zealand, BOP.
- Contact:
Re: '29 bitser racer...
john.whiting wrote:I hope the scrutineers don't spot that its powered by an electric drill.Regards John.
...it'l be hidden under the tank John
- barry.swanson
- Holder of a Nylon Anorak
- Posts: 274
- Joined: Sat Mar 05, 2011 10:45 pm
- Location: New Zealand, BOP.
- Contact:
Re: '29 bitser racer...
...this is an old quadrant and the cardboard templates of it, used to shape the steel plate to build a new one. Its been welded up but no plating has been done yet.
- barry.swanson
- Holder of a Nylon Anorak
- Posts: 274
- Joined: Sat Mar 05, 2011 10:45 pm
- Location: New Zealand, BOP.
- Contact:
Re: '29 bitser racer...
...this took a while to stumble accross. yet to be reconditioned...PS ignore the caption under the photo, I only have one of them...unfortunately!
- Attachments
-
- 2nd race mag.JPG (24.68 KiB) Viewed 4960 times
- chris.vredenbregt
- Holder of a Waxed Cotton Anorak
- Posts: 450
- Joined: Sun Feb 27, 2011 1:37 pm
- Location: the netherlands
- Contact:
Re: '29 bitser racer...
That's a real one KR-1 racing mag.expensive....chris
black ariel model G special 1930 500 OHV
- barry.swanson
- Holder of a Nylon Anorak
- Posts: 274
- Joined: Sat Mar 05, 2011 10:45 pm
- Location: New Zealand, BOP.
- Contact:
Re: '29 bitser racer...
...no they aren't common here Chris, it wasn't complete when I got it just a body without magnet and internals, so I didn't pay a lot for it...sometimes you get lucky!
- chris.vredenbregt
- Holder of a Waxed Cotton Anorak
- Posts: 450
- Joined: Sun Feb 27, 2011 1:37 pm
- Location: the netherlands
- Contact:
Re: '29 bitser racer...
A friend of mine bought one for 1200 euro= 1800 of your dollars to fit his 1930 norton.....chris
black ariel model G special 1930 500 OHV
Who is online
Users browsing this forum: Ahrefs [Bot] and 5 guests