Square four Barrel nuts.
-
Colinbrindley
- Posts: 14
- Joined: Wed Oct 18, 2023 8:59 pm
- Contact:
Square four Barrel nuts.
Square four 1947 Iron head. Taking the barrel off to fit a 2mm base spacer. Mag is still bolted on and I`m struggling to get a spanner on the 2 nuts on the rear. The Mag is in the way. Is there a special spanner/tool or am I going to be chopping a 1/4" spanner and making something ?
1947 Square four ironhead.1943 BSA WM20.1948 Brockhouse Corgi in bits. A very patient MRS.
-
Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1143
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: Square four Barrel nuts.
There is nothing listed in the parts book. The MKI used a couple of extended nuts for this reason, fit as many of these as is convenient.
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
-
Colinbrindley
- Posts: 14
- Joined: Wed Oct 18, 2023 8:59 pm
- Contact:
Re: Square four Barrel nuts.
Thanks Roger, I shall be cobbling something together then.
1947 Square four ironhead.1943 BSA WM20.1948 Brockhouse Corgi in bits. A very patient MRS.
Who is online
Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 27 guests