Hi,
I’m after the rigid feed pipe that fits between the rocker spindles for my ‘54 Ali-head VH. It’s the bit with 2 banjos soldered to a Tee piece.
I’d also like to know how it connects to the return oil pipework.
Is there supposed to be a rubber Tee-piece that splices into the circuit?
Ta, MarkCrossley
Wanted- Rocker feed pipe - Ali head VH
-
- Posts: 11
- Joined: Fri Mar 25, 2011 1:11 pm
- Contact:
- Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1143
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: Wanted- Rocker feed pipe - Ali head VH
Hi Bruno
There is a short rubber connection to a plain length of copper pipe that goes into a 't' piece inserted between the return line and oil tank
Rocker feed 140A-52
Short pipe 139-52
long plain pipe 140B-52
'T' piece 5892-52
All are listed and illustrated here
https://draganfly.co.uk/product-categor ... ead-valve/
and
https://draganfly.co.uk/product-categor ... k-filters/
Also to be found in the parts book available free to members on our web site.
There is a short rubber connection to a plain length of copper pipe that goes into a 't' piece inserted between the return line and oil tank
Rocker feed 140A-52
Short pipe 139-52
long plain pipe 140B-52
'T' piece 5892-52
All are listed and illustrated here
https://draganfly.co.uk/product-categor ... ead-valve/
and
https://draganfly.co.uk/product-categor ... k-filters/
Also to be found in the parts book available free to members on our web site.
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
-
- Posts: 11
- Joined: Fri Mar 25, 2011 1:11 pm
- Contact:
Re: Wanted- Rocker feed pipe - Ali head VH
Hi Roger,
Thanks very much for the input. I’ve printed a copy of the whole issue 14 Drags catalogue. (At work. After hours) It’s been invaluable over the years.
Does the rubber tee-piece fit between the main oil return pipe and the unthreaded oil tank return stub?
Thanks again,
Mark
Thanks very much for the input. I’ve printed a copy of the whole issue 14 Drags catalogue. (At work. After hours) It’s been invaluable over the years.
Does the rubber tee-piece fit between the main oil return pipe and the unthreaded oil tank return stub?
Thanks again,
Mark
- Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1143
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: Wanted- Rocker feed pipe - Ali head VH
Yes!
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
Who is online
Users browsing this forum: No registered users and 11 guests