WNG toolbox mounting clips

[john.nash]

Is there a source for the mounting hardware to enable me to get a second (hinged) front toolbox onto my WNG ?
John Budgen is out.

cheers

[dave.owen]

if you find any , let me know I need a set , if you get a pattern can we make them

Dave

[magne.aga]

What exactly are you looking for?

[dave.owen]

Like john, I'm looking for the clips to hold the top toolbox

Dave

[mike.giannetakis]

Are you looking for the original brucket that is made to hold both toolboxes , or a replaicement brucket that will hold only the front toolbox to the w/ng ?

[john.nash]

I have a bottom toolbox
I have a replica top/upper, hinged, box

What I am missing (like Dave) are the brackets/mounts that hold the bottom box to the top box (and the top box to frame)

http://www.arielownersmcc.com/members ... ng_033.jpg

6560-40 (E9/901)
6561-40 (E9/904)
6565-35 (E10/122A)

To be fair, only the 6560-40 will be sticky although the standard 6560-36 could be modified:

[mike.giannetakis]

Dear John i can make a pair for you , and a pair for Dave. I have got the original of my bike and i can easily copy them.
Last week i made a pair of those above ( 6560-36 ) in order to curry only one toolbox.

[john.nash]

That is very kind of you.
What would you like in return ? Something swapped or some cash (paypal) .. I have a few single bits here ...

We're both in the UK and it looks like you aren't

cheers

[mike.giannetakis]

Dear John , i am not waiting something in return. We have something in common - we love Ariels.
This is lke a community , i will do something for you , someday you are going to do something for me.
May be a part that is missing , maybe an advice.. I will get a pair ready an i will post pictures.

[mike.giannetakis]

And a pair for Dave , i will ship them by post. Just p.m. your adress details and tel.