I am trying to identify an odd clutch pushrod I found in the bottom of a box, length 9 3/8 inches.
It should be for a GB gearbox, but what combination of GB box and clutch type ( 2 or 3 friction plates) I don't know.
I have been unable to find anything in the knowledgebase to identify it, so if anyone has this info I would be grateful to know. If anyone has a table of the gearbox/clutch type combinations to suit the differing lengths of pushrods, that could be uploaded to the knowledgebase, that would be even better!!!
Clutch pushrod lengths
-
- Holder of a Silver Anorak
- Posts: 648
- Joined: Fri Feb 18, 2011 10:26 am
- Location: Cardiff
- Contact:
-
- Posts: 27
- Joined: Thu Feb 24, 2011 11:44 am
- Location: Kent
- Contact:
Re: Clutch pushrod lengths
According to Drags on-line shopit seems to be GB 2 plate 1952-55 http://www.draganfly.co.uk/shop/pi16807 ... goryId=100
-
- Holder of a Silver Anorak
- Posts: 648
- Joined: Fri Feb 18, 2011 10:26 am
- Location: Cardiff
- Contact:
Who is online
Users browsing this forum: No registered users and 20 guests