Page 1 of 1
W/NG oil supply to rockers 1943
Posted: Fri Nov 05, 2021 8:52 pm
by tcolbourne
The engine in my 1943 W/NG has no oil feed from the engine timing side cover as per NH normal. it appears rocker supply comes from the oil tank?--or from the return line to the oil tank?
Re: W/NG oil supply to rockers 1943
Posted: Fri Nov 05, 2021 9:00 pm
by simon.holyfield
Or perhaps it has the wrong timing gear cover? Wasn't the feed deleted post 1952?
Re: W/NG oil supply to rockers 1943
Posted: Sat Nov 06, 2021 7:16 am
by nevhunter
All bar the earliest WNG's relied on the internal ball valve with no adjustment. You most likely have a later (mid 50's) case. You should be able to get the correct one without that much trouble. Nev
Re: W/NG oil supply to rockers 1943
Posted: Sat Nov 06, 2021 9:11 pm
by alan.moore
Have a look at these previous topics which should help understand the differences in timing covers and the oil feed to the rockers
viewtopic.php?f=4&t=3917&start=10
viewtopic.php?f=4&t=4547&start=20
Hope this helps
Cheers
Alan
Re: W/NG oil supply to rockers 1943
Posted: Sun Nov 07, 2021 2:43 pm
by tcolbourne
Thanks for the info guys--i imagine i must have a timing cover off a mid 1950's bike. I'll put a wanted add on the forum to see if i can get the correct one.
Re: W/NG oil supply to rockers 1943
Posted: Sun Nov 07, 2021 3:59 pm
by JohnnyBeckett
hi keep looking om Ariel parts on EBAY there have been some on there lately, i got one for someone a couple of weeks ago off Ebay
Re: W/NG oil supply to rockers 1943
Posted: Sat Nov 20, 2021 8:57 pm
by Vincent.vanGinneke
Hello Tom, I have send you a PM with pictures
Re: W/NG oil supply to rockers 1943
Posted: Sat Dec 11, 2021 3:19 am
by tcolbourne
thanks guys--i found a timing cover with the correct rocker feed connection-and a complete engine for a 1950 NH with a good timing cover but a bit expensive but still thinking.