1 Inch tubing in the Netherlands

Recommend a bike related business
Post Reply
User avatar
Vincent.vanGinneke
Holder of a Platinum Anorak
Holder of a Platinum Anorak
Posts: 4294
Joined: Sat Apr 09, 2011 12:14 am
Location: "The Dutch Branch"
Contact:

1 Inch tubing in the Netherlands

Post by Vincent.vanGinneke »

For those in the Netherlands who are looking for 1" tubing :

Westland Customs

https://www.westlandcustoms.com/1-meter ... mm-(staal)

They also supply other inch sizes.

This is tubing with a seam, I have not been able to find seamless in NL.
Possibly it is available but only if you buy a truckload :)
User avatar
Richard Kal
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 290
Joined: Thu Jul 14, 2011 6:12 am
Contact:

Re: 1 Inch tubing in the Netherlands

Post by Richard Kal »

CDS tubing (cold drawn seamless) is the tubing used throughout the fluid power (hydraulics) industry.

The standard length for 1" tubing is 8 metres (or 6 metres)

Contact your local hydraulics companies and you should be able to buy the length you want; i.e. if you need 3.5 metres they should be able to cut that amount.

They will have the benders to shape the tubing, so can bend for you as well.

Richard
(works in hydraulics)
User avatar
Vincent.vanGinneke
Holder of a Platinum Anorak
Holder of a Platinum Anorak
Posts: 4294
Joined: Sat Apr 09, 2011 12:14 am
Location: "The Dutch Branch"
Contact:

Re: 1 Inch tubing in the Netherlands

Post by Vincent.vanGinneke »

Hello Richard, thanks for that, but isn't the wall thickness a bit to much for a motorcycle frame ?
john.whiting
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1837
Joined: Sun May 22, 2011 2:10 pm
Location: Brisbane QLD
Contact:

Re: 1 Inch tubing in the Netherlands

Post by john.whiting »

The CDS hydraulic tube is available in different wall thicknesses,up to heavy enough to be used for gunbarrels.....not that it matters for a bike frame,but each length is also proof tested to as much as 10,000psi......Stainless is also available ,and its a malleable type,can be flared and swaged.
User avatar
Richard Kal
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 290
Joined: Thu Jul 14, 2011 6:12 am
Contact:

Re: 1 Inch tubing in the Netherlands

Post by Richard Kal »

What John said.
Hydraulic tubing (CDS1010) comes in a number of gauges. Welds beautifully.

The heavier gauge you use, the easier it is to weld, and the stronger the frame.
User avatar
Vincent.vanGinneke
Holder of a Platinum Anorak
Holder of a Platinum Anorak
Posts: 4294
Joined: Sat Apr 09, 2011 12:14 am
Location: "The Dutch Branch"
Contact:

Re: 1 Inch tubing in the Netherlands

Post by Vincent.vanGinneke »

Hello Richard, John,
It sure is on the list with the larger steel companys over here but you cant buy just one lenght.
I have not found a hydraulic pipe dealer that stocks, or wants to stock, the 1" size thin walled.
It's all metric here.
So I opted for the seam type that I can buy per meter.
I did bite the bullet for a lenght (6 meter) of 48mm thin wall seamless 'precision tube' for making one (1 :o ) exhaust pipe.
That costed 230,- euro including transport :) I saved 50,- (!) on the transport because I allowed them to cut the lenght in half :D hmmm , you either want something or you dont want something....
Oh yes, I can have that exhaust pipe made in the Netherlands but only in 45mm, not in 48mm. No good....
User avatar
Richard Kal
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 290
Joined: Thu Jul 14, 2011 6:12 am
Contact:

Re: 1 Inch tubing in the Netherlands

Post by Richard Kal »

Hi Vincent,
What tube size (OD) were you looking for, and what quantity?
User avatar
adrie.degraaff
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 3275
Joined: Sun Feb 27, 2011 10:07 am
Location: Holland
Contact:

Re: 1 Inch tubing in the Netherlands

Post by adrie.degraaff »

I still have some 1 inch tubing of a 50ies army power generator.

We waren op camping Lelystad maar gaan vandaag naar huis :D .
User avatar
Vincent.vanGinneke
Holder of a Platinum Anorak
Holder of a Platinum Anorak
Posts: 4294
Joined: Sat Apr 09, 2011 12:14 am
Location: "The Dutch Branch"
Contact:

Re: 1 Inch tubing in the Netherlands

Post by Vincent.vanGinneke »

Hello Richard, for now I am o.k. and Australia is atm not on my list for a visit, But..Adrie, Thanks! (I assume now that I can have a bit) in a few weeks time I will be -again- in Egmond, I let you know. :D
User avatar
adrie.degraaff
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 3275
Joined: Sun Feb 27, 2011 10:07 am
Location: Holland
Contact:

Re: 1 Inch tubing in the Netherlands

Post by adrie.degraaff »

Vincent.vanGinneke wrote:(I assume now that I can have a bit)
Yes you can.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests