Earlier longer grip
Posted: Mon Mar 09, 2020 10:15 am
This came with an wng project.
I am using 7/8" bars with the two shims in the fork clamp ( the damper is deleted so likely correct).
The throttle tube is 7/8" but the clamp is 1" ?
Is this how they were originally for the tapered bars ?
I'll have to shim the clamp bit, to fit the 7/8" bars, and find/make the insert for the cable .
Shown next to a standard later tube. The cable bit is brass.
I am using 7/8" bars with the two shims in the fork clamp ( the damper is deleted so likely correct).
The throttle tube is 7/8" but the clamp is 1" ?
Is this how they were originally for the tapered bars ?
I'll have to shim the clamp bit, to fit the 7/8" bars, and find/make the insert for the cable .
Shown next to a standard later tube. The cable bit is brass.