Page 1 of 1
6560-41 toolbox tube clip
Posted: Thu Feb 20, 2020 2:55 am
by LuisPaz
Once again I request your help with measures to reproduce the clip. Any drawing? Hole size? Nut and bolt?
Lenght between both clips?
Thanks in advance!
Re: 6560-41 toolbox tube clip
Posted: Fri Feb 21, 2020 12:42 pm
by john.nash
Re: 6560-41 toolbox tube clip
Posted: Fri Feb 21, 2020 7:16 pm
by alan.moore
Mariano....just a tip, sometimes if the toolboxes are not WNG originals they don't line up correctly with the original brackets fitted. Try making a couple of brackets out of thin scrap aluminium first to get the alignment correct then make out of steel. Don't forget the L shaped bracket from the rear of the top box to the mudguard stay (6561-41) and the reinforcing metal strips 6565-35 that fit inside the toolboxes under the bracket securing nuts.
I will send you the rear mudguard measurements this weekend
Cheers
Alan
Re: 6560-41 toolbox tube clip
Posted: Sat Feb 22, 2020 2:21 am
by LuisPaz
John , Alan thank you very much for your reply!
Today I made the clips according the WNG pics found on Google.
Seems to be I have a good eyes ....
Re: 6560-41 toolbox tube clip
Posted: Sun Feb 23, 2020 2:07 pm
by LuisPaz
Re: 6560-41 toolbox tube clip
Posted: Sun Feb 23, 2020 10:40 pm
by JohnnyBeckett
HI Another very good job you have made again
Re: 6560-41 toolbox tube clip
Posted: Sun Feb 23, 2020 11:36 pm
by alan.moore
Nice job
Re: 6560-41 toolbox tube clip
Posted: Tue Feb 25, 2020 1:31 am
by LuisPaz
Thank you Alan!
Today reinforce clips with more welding!
