WNG Rear Mudguard measures
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
Re: WNG Rear Mudguard measures
Thank You Johnny!
Today continue with the mobile stays
My read mudguard is Frankestain!
The angle is wrong... needs to be corrected
Today continue with the mobile stays
My read mudguard is Frankestain!
The angle is wrong... needs to be corrected
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
- alan.moore
- Holder of a Golden Anorak
- Posts: 1457
- Joined: Sat Jul 19, 2014 1:29 pm
- Location: Leicestershire UK
- Contact:
Re: WNG Rear Mudguard measures
Looking good Luis
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single;1952 VHA engined project
http://cloggymoore.wix.com/triumph-pre-unit-6t
http://cloggymoore.wix.com/triumph-pre-unit-6t
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
Re: WNG Rear Mudguard measures
Thank You Alan!
The screw to join stays to mudguard are 1/4 " diameter , and what thread?
https://www.draganfly.co.uk/index.php/c ... oduct/537-
Regards!
The screw to join stays to mudguard are 1/4 " diameter , and what thread?
https://www.draganfly.co.uk/index.php/c ... oduct/537-
Regards!
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
-
- Holder of a Golden Anorak
- Posts: 2391
- Joined: Sat Jul 07, 2018 5:39 pm
- Contact:
Re: WNG Rear Mudguard measures
HI Luis i think if they look like a fine thread it is 26 TPI CEI ( CYCLE THREAD ) or if it looks like a course thread it is BSW ( WHITWORTH ) that is the common threads that i use on most of my Ariel's some times i find someone has used different type of bolts and screws if they did not have the right ones like the ARIEL i am doing now it got lots of all different types of nuts and bolts with the wrong threads and nut sizes
- alan.moore
- Holder of a Golden Anorak
- Posts: 1457
- Joined: Sat Jul 19, 2014 1:29 pm
- Location: Leicestershire UK
- Contact:
Re: WNG Rear Mudguard measures
Luis
26 tpi cycle thread, same as the majority of the fastners.
Cheers
alan
26 tpi cycle thread, same as the majority of the fastners.
Cheers
alan
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single;1952 VHA engined project
http://cloggymoore.wix.com/triumph-pre-unit-6t
http://cloggymoore.wix.com/triumph-pre-unit-6t
-
- Holder of a Golden Anorak
- Posts: 2391
- Joined: Sat Jul 07, 2018 5:39 pm
- Contact:
Re: WNG Rear Mudguard measures
HI most of the bolts and screws are 26 TPI but their is some BA as well on the bike but the engine and gearbox are mostly BSW
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
Re: WNG Rear Mudguard measures
I need turning the mudguard stay nut..
Can tell me the hexagon size?
Thanks in advance!
Can tell me the hexagon size?
Thanks in advance!
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
Re: WNG Rear Mudguard measures
Today working with Lathe . Nut ready to cut and threading. I think this is NO correct nut to WNG because cannot put the pannier frame bracket....
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
- alan.moore
- Holder of a Golden Anorak
- Posts: 1457
- Joined: Sat Jul 19, 2014 1:29 pm
- Location: Leicestershire UK
- Contact:
Re: WNG Rear Mudguard measures
Adrie
Here are the two nuts from my WNG, as far as I know they are original. I had a problem in that with the pannier mounting brackets fitted I could not get a spanner on these nuts as they were too big. I then used two half width normal size 5/16 nuts with washers for the raised part to solve the problem. Cheers
Alan
Here are the two nuts from my WNG, as far as I know they are original. I had a problem in that with the pannier mounting brackets fitted I could not get a spanner on these nuts as they were too big. I then used two half width normal size 5/16 nuts with washers for the raised part to solve the problem. Cheers
Alan
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single;1952 VHA engined project
http://cloggymoore.wix.com/triumph-pre-unit-6t
http://cloggymoore.wix.com/triumph-pre-unit-6t
- LuisPaz
- Holder of a Waxed Cotton Anorak
- Posts: 320
- Joined: Fri Jan 19, 2018 12:59 am
- Location: Argentina
- Contact:
Re: WNG Rear Mudguard measures
Hi Alan!
Thank you very much for your help!
My head nut have 21/32.... they are a pair of bolts that I found in the waste can!
Thank you very much for your help!
My head nut have 21/32.... they are a pair of bolts that I found in the waste can!
Luis, from Argentina
1944 Ariel WNG
1944 Ariel WNG
Who is online
Users browsing this forum: No registered users and 1 guest