GB gearbox

Singles, twins and fours.
Post Reply
User avatar
charles.bulloch
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 245
Joined: Sun Mar 06, 2011 8:58 pm
Contact:

GB gearbox

Post by charles.bulloch »

Hi, all.

Can you use semi-liquid grease in a GB gearbox and if you do can you use the level plug and drain plug?

Charlie
User avatar
Roger Gwynn
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1145
Joined: Tue May 28, 2013 11:34 am
Location: Norwich, UK
Contact:

Re: GB gearbox

Post by Roger Gwynn »

I can't see why not, although the level plug is rather small so there is likely to be a delay between the fluid reaching that level and it starting to dribble out. I would use EP90 and see little if any advantage to using semi-fluid grease
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
User avatar
dave.owen
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1805
Joined: Wed Mar 23, 2011 10:05 pm
Location: swindon
Contact:

Re: GB gearbox

Post by dave.owen »

Grease is less likely to leak from the speedo drive
AOMCC Treasurer
User avatar
paul.jameson
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2950
Joined: Wed Oct 12, 2011 3:04 pm
Location: Herefordshire
Contact:

Re: GB gearbox

Post by paul.jameson »

I had a 1957 NH where the previous owner had filled the GB box with grease, just the same as he had done on his earlier Ariels. It worked perfectly well.
Paul Jameson
35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
User avatar
robjameson
Holder of a Silver Anorak
Holder of a Silver Anorak
Posts: 900
Joined: Mon Feb 28, 2011 11:36 am
Location: Rolleston, Staffordshire
Contact:

Re: GB gearbox

Post by robjameson »

I run semi fluid grease in both of my bikes with GB boxes, precisely because I was sick of oil leaking out of the Speedo drive. VH has done thousands of miles like that so works for me. I don’t use the level plug, I just syringe it in and occasionally squirt some oil from the can in through the filler plug.
Rob Jameson
AOMCC Member Number 4068
1957 Ariel VH
1954 Ariel KH
1948 Ariel 4G with 1920's Ariel Sidecar/Triumph Chassis
AOMCC Twin Spares Organiser
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests