Good day,
May I ask what is the correct quantity of lubricant to go into the gearbox?
I cannot find this information anywhere in the instruction manuals.
I'm using Penrite semi-fluid grease.
Thanks
John
KH500 Gearbox
-
- Holder of a Golden Anorak
- Posts: 2405
- Joined: Sat Jul 07, 2018 5:39 pm
- Contact:
Re: KH500 Gearbox
hi, it will have a level plug i would fill it up till comes the level plug hole
-
- Holder of a Golden Anorak
- Posts: 2405
- Joined: Sat Jul 07, 2018 5:39 pm
- Contact:
Re: KH500 Gearbox
hi, it will have a level plug i would fill it up till comes the level plug hole
- Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1199
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: KH500 Gearbox
If you are using a semi fluid grease I assume the gearbox is a C or BA Burman. Burman's say about 1/3 full but not to worry if you overfill as it ooze out of the box until it reached the correct level. I usually put a whole tin of this in https://draganfly.co.uk/shop/83795/gear ... 11/#OI-GRB
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
-
- Posts: 38
- Joined: Thu Sep 19, 2019 6:11 pm
- Contact:
Re: KH500 Gearbox
Thank you Gentlemen.
I have 600g so I will put that in.
Regards
John
I have 600g so I will put that in.
Regards
John
-
- Holder of a Platinum Anorak
- Posts: 5076
- Joined: Tue May 10, 2011 9:42 am
- Location: Victoria.. Australia.
- Contact:
Re: KH500 Gearbox
IF you have enough in it should be churning when the bike is run in gear on the stand, visible through the filler on a BAP. Nev
Who is online
Users browsing this forum: No registered users and 0 guests