Hello,
I wonder if there should be an isolating gasket between the cylinder head and the solex carburetor on my ion head sq4, or just a plain gasket…
sq4 gasket betwee cylinder head and solex carb.
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4699
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: sq4 gasket betwee cylinder head and solex carb.
Put an insulating gasket in - I've used 3mm phenolic (there's no room for anything thicker) and recorded 40-70°C temperature drops across it.
You might need to extend the carburettor mounting studs.
You might need to extend the carburettor mounting studs.
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Re: sq4 gasket betwee cylinder head and solex carb.
Hi Simon,
Thanks a lot for your comments, I will certainly install one. I bought new studs from ACME, and they were a bit on the long side, that’s really made me wonder if there should be a isolating gasket, Thanks for the help…
Thanks a lot for your comments, I will certainly install one. I bought new studs from ACME, and they were a bit on the long side, that’s really made me wonder if there should be a isolating gasket, Thanks for the help…
- paul.jameson
- Holder of a Golden Anorak
- Posts: 2950
- Joined: Wed Oct 12, 2011 3:04 pm
- Location: Herefordshire
- Contact:
Re: sq4 gasket betwee cylinder head and solex carb.
You can run without an insulating spacer but I always fit one to my Square Fours. Space is particularly tight on the iron engined ones if the head or rocker box has been skimmed.
Paul Jameson
35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
Re: sq4 gasket betwee cylinder head and solex carb.
Hi Paul, I will certainly try to install one, I have the new rocker box from Draganfly, gona be quite interesting. Thanks for replying..
Who is online
Users browsing this forum: No registered users and 11 guests