Wanted- Rocker feed pipe - Ali head VH

[bruno.crossley]

Hi,
I’m after the rigid feed pipe that fits between the rocker spindles for my ‘54 Ali-head VH. It’s the bit with 2 banjos soldered to a Tee piece.
I’d also like to know how it connects to the return oil pipework.
Is there supposed to be a rubber Tee-piece that splices into the circuit?

Ta, MarkCrossley

[Roger Gwynn]

Hi Bruno
There is a short rubber connection to a plain length of copper pipe that goes into a 't' piece inserted between the return line and oil tank
Rocker feed 140A-52
Short pipe 139-52
long plain pipe 140B-52
'T' piece 5892-52
All are listed and illustrated here
https://draganfly.co.uk/product-categor ... ead-valve/
and
https://draganfly.co.uk/product-categor ... k-filters/
Also to be found in the parts book available free to members on our web site.

[bruno.crossley]

Hi Roger,
Thanks very much for the input. I’ve printed a copy of the whole issue 14 Drags catalogue. (At work. After hours) It’s been invaluable over the years.
Does the rubber tee-piece fit between the main oil return pipe and the unthreaded oil tank return stub?

Thanks again,
Mark

[Roger Gwynn]

Yes!