Swinging arm single distance pieces
-
- Posts: 4
- Joined: Sun Jan 01, 2023 10:09 am
- Contact:
Swinging arm single distance pieces
I am missing the distance pieces on my 1955 VB, can anybody help me with the dimensions of the distance pieces 2380 etc.
- charles.bulloch
- Holder of a Nylon Anorak
- Posts: 245
- Joined: Sun Mar 06, 2011 8:58 pm
- Contact:
Re: Swinging arm single distance pieces
Hi. Check the attached drawing. You can probably buy one from Acme Stainless or Draganfly.
Charlie
Charlie
- Attachments
-
- ARIEL SWINGING ARM INTERNAL SPACER 1954.doc
- (32 KiB) Downloaded 35 times
-
- Holder of a Golden Anorak
- Posts: 2381
- Joined: Sat Jul 07, 2018 5:39 pm
- Contact:
Re: Swinging arm single distance pieces
hi i got a set of spacers from drags for my 1954 , the ones the bike had were all wrong, got the new set and now very happy
-
- Posts: 4
- Joined: Sun Jan 01, 2023 10:09 am
- Contact:
Re: Swinging arm single distance pieces
Thanks for the reply, tried drags, but some are out of stock or on back order
- robjameson
- Holder of a Silver Anorak
- Posts: 900
- Joined: Mon Feb 28, 2011 11:36 am
- Location: Rolleston, Staffordshire
- Contact:
Re: Swinging arm single distance pieces
Alex,
I think I have a spacer which is currently surplus to requirements. Not sure if I want it out of my spares pile, but you could use as a pattern?
Rob
I think I have a spacer which is currently surplus to requirements. Not sure if I want it out of my spares pile, but you could use as a pattern?
Rob
Rob Jameson
AOMCC Member Number 4068
1957 Ariel VH
1954 Ariel KH
1948 Ariel 4G with 1920's Ariel Sidecar/Triumph Chassis
AOMCC Twin Spares Organiser
AOMCC Member Number 4068
1957 Ariel VH
1954 Ariel KH
1948 Ariel 4G with 1920's Ariel Sidecar/Triumph Chassis
AOMCC Twin Spares Organiser
- keith.mettam
- Holder of a Waxed Cotton Anorak
- Posts: 515
- Joined: Wed Mar 02, 2011 1:46 pm
- Location: Kent UK
- Contact:
Re: Swinging arm single distance pieces
Hi Alex,
As mentioned, Acme do them. You need the single metalastic spacer 4 1/2" long tube, scroll down in this link:-
https://acmestainless.co.uk/product-cat ... cba1185463
It won't rust either being stainless so removing the spindle in future should be fairly easy.
Best wishes,
Keith.
As mentioned, Acme do them. You need the single metalastic spacer 4 1/2" long tube, scroll down in this link:-
https://acmestainless.co.uk/product-cat ... cba1185463
It won't rust either being stainless so removing the spindle in future should be fairly easy.
Best wishes,
Keith.
-
- Posts: 4
- Joined: Sun Jan 01, 2023 10:09 am
- Contact:
Re: Swinging arm single distance pieces
Thanks to everybody problem now solved
Who is online
Users browsing this forum: rein.heerkens and 11 guests