Tele fork oil seals
-
- Holder of a Nylon Anorak
- Posts: 226
- Joined: Sun Jan 25, 2015 4:58 pm
- Location: Lancashire UK
- Contact:
Re: Tele fork oil seals
Hi Bevan, glad to read that you got it sorted quickly and will be back on the road. I measured my original 1950 seal holders and they are 1.825” (46.35mm) where the seal fits. This gives a few thou interference on the diameter 1.832” I measured my club seals at and the diameter Roger confirmed for Draganfly stock. It seems that you have some different holders and you learned something new about your bike. Don’t forget the sealant or string in the threads when you screw the holders back on! Paul
-
- Holder of a Nylon Anorak
- Posts: 274
- Joined: Fri Jun 08, 2018 3:58 am
- Location: Methven, New Zealand
- Contact:
Re: Tele fork oil seals
Thanks Paul, i just screwed them back on with some ptfe plumbing tape in the threads, so hopefully that may be effective. Cheers, Bevan
-
- Holder of a Nylon Anorak
- Posts: 274
- Joined: Fri Jun 08, 2018 3:58 am
- Location: Methven, New Zealand
- Contact:
Re: Tele fork oil seals
In case anyone else discovers they have a metric sized seal holder:
Who is online
Users browsing this forum: No registered users and 9 guests