Hi All, I've found the drive gear on my Lucas DKX4 distributor is badly worn, the worm gear on the dynamo armature shaft could also use renewal. First question, anybody know where I can get hold of the 12 tooth driven gear mounted on the bottom of the distributor? Dragonfly have them on backorder for the last 3 years and are not confident of getting some any time soon! So a good 2nd hand one would suffice.
Second question, in order to change the worm gear on the dynamo armature shaft, do I need to remove the complete dynamo first or can it be replaced through the timing chest access?
All advice will be gratefully received.
Andy
DKX4 Distributor 1958 SQ4
-
- Posts: 7
- Joined: Tue Mar 05, 2013 3:05 pm
- Contact:
- Paul_Linden
- Holder of a Silver Anorak
- Posts: 686
- Joined: Sat Oct 15, 2011 10:08 pm
- Location: Exeter, UK
- Contact:
Re: DKX4 Distributor 1958 SQ4
If you are in the UK then have a look at Lucas distributors on eBay - here is a DKX4 with a 12 tooth drive gear:
https://www.ebay.co.uk/itm/256008995942 ... media=COPY
although you should check with the seller that it is the one you seek.
Have you tried the Distributor Doctor? You can find him online by googling.
https://www.ebay.co.uk/itm/256008995942 ... media=COPY
although you should check with the seller that it is the one you seek.
Have you tried the Distributor Doctor? You can find him online by googling.
Square 4 mk1, Square 4 mk2, BSA C12.
-
- Holder of a Golden Anorak
- Posts: 2382
- Joined: Sat Jul 07, 2018 5:39 pm
- Contact:
Re: DKX4 Distributor 1958 SQ4
hi and try powerspark they may have one , they do a lot of new distributors and parts they are on Ebay and you can ring them up
Who is online
Users browsing this forum: Bing [Bot] and 12 guests