Hi Folks - I've spent countless hours transcribing the "Square Four" logo was is cast in the timing chest (from 1949 onward)
into a single curved line for a front numberplate blade. - such script is NOT a font hence most of the "CAD" was performed manually...
So please; - does anyone have a ttf of "Stratison 31 Extrude Black" font they could let me have? -
such is the closest I can indentify to the tank badge logo of the era and I really have no wish do a repeat of a bitmap extraction...!!!
Cheers, John
Ariel font...
-
- Holder of a Nylon Anorak
- Posts: 123
- Joined: Tue Mar 16, 2021 9:54 pm
- Location: South Devon, UK
- Contact:
Re: Ariel font...
Hi John – can’t help with that specific font, but have you tried ‘WhatTheFont’? “Instant font identification powered by the world’s largest collection of fonts”. May produce a very close or even better alternative…
https://www.myfonts.com/pages/whatthefont
A quick try with some ARIEL lettering off the homepage produced this example:
https://www.myfonts.com/pages/whatthefont
A quick try with some ARIEL lettering off the homepage produced this example:
’54 VH,
‘72 BMW R60/5, ‘83 BMW R80RT
‘72 BMW R60/5, ‘83 BMW R80RT
-
- Holder of a Nylon Anorak
- Posts: 123
- Joined: Tue Mar 16, 2021 9:54 pm
- Location: South Devon, UK
- Contact:
Re: Ariel font...
Well… I was hoping that might have been useful – but perhaps not…
’54 VH,
‘72 BMW R60/5, ‘83 BMW R80RT
‘72 BMW R60/5, ‘83 BMW R80RT
- Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1145
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: Ariel font...
JB may not be listening!
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
Re: Ariel font...
Could well be others who might find that useful....like me!
SG
SG
Administrator
webmaster@arielownersmcc.com
webmaster@arielownersmcc.com
- john.bebb
- Holder of a Nylon Anorak
- Posts: 287
- Joined: Mon Sep 02, 2013 1:29 pm
- Location: Frinton on Sea, Essex, UK
- Contact:
Re: Ariel font...
Hi Peoples - ok (RG) - sure - I was not "listening" as too involved with bitmap transforms...
latest proof herewith; - to be discussed with painter to ascertain fiducials for the stencils
The "Square Four" and legends below are on curves centered to the axle &
the "ARIEL" logo is parallel to the blade flat.
The apparent stepping on lines is solely a limitation of the .png rendering.
NB - this is NOT to the Drags "std" blade as such does not fit my gaurd...
afaic the Drags item has an incorrect curvature & misaligned mounting holes.
Cheers, John
latest proof herewith; - to be discussed with painter to ascertain fiducials for the stencils
The "Square Four" and legends below are on curves centered to the axle &
the "ARIEL" logo is parallel to the blade flat.
The apparent stepping on lines is solely a limitation of the .png rendering.
NB - this is NOT to the Drags "std" blade as such does not fit my gaurd...
afaic the Drags item has an incorrect curvature & misaligned mounting holes.
Cheers, John
- john.bebb
- Holder of a Nylon Anorak
- Posts: 287
- Joined: Mon Sep 02, 2013 1:29 pm
- Location: Frinton on Sea, Essex, UK
- Contact:
Re: Ariel font...
at long last... now commited to stenciling.
plite reminder that it is NOT on the (std?) Drags blade
plite reminder that it is NOT on the (std?) Drags blade
Who is online
Users browsing this forum: Ahrefs [Bot] and 24 guests