'46/47 350RH Rocker Oil Feed Pipe Wanted

[Ashley.George]

Having nearly finished the overhaul of my 1946/47 350 Red Hunter all I need is the 1/4" rocker oil feed pipe from the oil pump casing up to the two rocker covers. I ordered on with Draganfly in August 2020 and they still haven't had any stock in, neither has the very helpful John Budgen.
If you have a spare one, new or secondhand, I would be eternally grateful if you would sell it to me! Thnak you.

[robjameson]

If you go to your local chandlers they will have imperial copper pipe and fittings and you should be able to make one up yourself.

[tcolbourne]

Hi,

I have a 1950 NH with same pipe setup--i had the fittings for the rockers and the fitting on the timing side casing from the oil pump--i made up my own pipe using 1/4 brass tubing and soldered it together to the fittings--works just fine--i painted it silver afterwards to match the covers.