I've just got round to fitting the new 31340 switch into the instrument panel on my 1957 Huntmaster that I'm rebuilding. I've got the 308234 clip. but can't for the life of me figure out how the clip holds the switch in position. I'd be grateful for any advice, although I know I'm going to feel daft when it is explained and is pretty simple!
Thanks,
Frank
31340 switch and 308234 clip
-
- Posts: 43
- Joined: Wed Apr 25, 2018 2:09 pm
- Location: South Yorkshire
- Contact:
Re: 31340 switch and 308234 clip
Hi Frank
Like this?
Regards Mick
Like this?
Regards Mick
-
- Posts: 43
- Joined: Wed Apr 25, 2018 2:09 pm
- Location: South Yorkshire
- Contact:
Re: 31340 switch and 308234 clip
Thanks for the reply and photo Mick. My control panel doesn't look like yours. There is no folded edge to allow the tips of the clip to engage; it is just a smooth surface with nothing to grip against. As the bike was largely in bits when I got it, and the original switch had disappeared, I'm not sure that the panel is the right one for the bike. If I could figure out how to post pictures on here, I have taken a photograph.
Frank
Frank
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4698
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: 31340 switch and 308234 clip
Here's how to post images:
http://forum.arielownersmcc.com/viewt ... f=35&t=193
http://forum.arielownersmcc.com/viewt ... f=35&t=193
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Who is online
Users browsing this forum: Ahrefs [Bot], Majestic-12 [Bot] and 2 guests