Nh350
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4699
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: Nh350
Can't be timed that badly!
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
-
- Posts: 39
- Joined: Wed Jun 17, 2015 10:51 am
- Location: New Zealand
- Contact:
Re: Nh350
Nice machine, attached photo of my 54 NH 350
already had 500 Crank, top end and clutch
fitted. Had original guards and poorly spoked front
original front wheel and brake. The front wheel was
spoke to wrong rim causing spokes to look scary
Have kept all the original parts, but fitted Guzzi TLS
front wheel, Indian Enfield guards and recently
Flat slide carb. Also managed to find a NH350
alloy and iron barrel, along with many other engine
parts. Be intrested to know what mud guards
are on yours not alloy are they
Cheers
Bruce Saunders
already had 500 Crank, top end and clutch
fitted. Had original guards and poorly spoked front
original front wheel and brake. The front wheel was
spoke to wrong rim causing spokes to look scary
Have kept all the original parts, but fitted Guzzi TLS
front wheel, Indian Enfield guards and recently
Flat slide carb. Also managed to find a NH350
alloy and iron barrel, along with many other engine
parts. Be intrested to know what mud guards
are on yours not alloy are they
Cheers
Bruce Saunders
- adrie.degraaff
- Holder of a Golden Anorak
- Posts: 3275
- Joined: Sun Feb 27, 2011 10:07 am
- Location: Holland
- Contact:
Re: Nh350
1954 nh has a iron head.Bruce Saunders wrote:Also managed to find a NH350
alloy and iron barrel
-
- Posts: 39
- Joined: Wed Jun 17, 2015 10:51 am
- Location: New Zealand
- Contact:
Re: Nh350
Thanks for comment on NH350 having an Iron head,
luckily I have about 6 Iron heads, all though 3 are two port ones and also 6 350 exposed pushrod barrels.
along with crankcases, cams, timing cases etc.
Hoping collect enough parts to resurect a few
Ariels from parts as time March's on.
Amazing what turns up when you start looking.
Just had look at the 54 Sales brochure and don't
ever remember seeing the burgundy seat cover
shown on the Ariel singles, have to get one now
Kind regards
Bruce Saunders
luckily I have about 6 Iron heads, all though 3 are two port ones and also 6 350 exposed pushrod barrels.
along with crankcases, cams, timing cases etc.
Hoping collect enough parts to resurect a few
Ariels from parts as time March's on.
Amazing what turns up when you start looking.
Just had look at the 54 Sales brochure and don't
ever remember seeing the burgundy seat cover
shown on the Ariel singles, have to get one now
Kind regards
Bruce Saunders
Who is online
Users browsing this forum: No registered users and 17 guests