Front Brake Cam Lever
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4701
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Front Brake Cam Lever
Has anyone got one of these folks? It's a straight arm, PN 4141-40 and has the swivel end set up to accommodate the flats on the brake rod.
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
- paul.jameson
- Holder of a Golden Anorak
- Posts: 2954
- Joined: Wed Oct 12, 2011 3:04 pm
- Location: Herefordshire
- Contact:
Re: Front Brake Cam Lever
I got one from Drags last year for the 4G. You might have to adjust the alignment slightly but it works well enough.
Paul Jameson
35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
- dave.owen
- Holder of a Golden Anorak
- Posts: 1806
- Joined: Wed Mar 23, 2011 10:05 pm
- Location: swindon
- Contact:
Re: Front Brake Cam Lever
I also had one from Drags for a single with girders.all brake parts are also available
Dave
Dave
AOMCC Treasurer
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4701
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: Front Brake Cam Lever
Do Drags brake levers have a round hole for the rod? I have a cranked lever on the W/NG at the moment, which has a round hole.
I believe that the lever should be straight, and have a slot to prevent the brake rod rotating?
I believe that the lever should be straight, and have a slot to prevent the brake rod rotating?
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
- paul.jameson
- Holder of a Golden Anorak
- Posts: 2954
- Joined: Wed Oct 12, 2011 3:04 pm
- Location: Herefordshire
- Contact:
Re: Front Brake Cam Lever
My lever, ex Drags, is slotted but has a round hole on the top side to part way through. The slot only exists for perhaps a third of the total length of the hole, as per the originals. I assume the slot going only part of the way through is for ease of manufacture but I suppose it could also be to allow a small amount of rotation before the brake rod has to bend if the joint between pin and arm becomes solid.
Paul Jameson
35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
35 LG (project), 37 RH500, 52 ex ISDT KHA, 54 KH(A), 75 Healey 1000/4.
Former Machine Registrar & Archivist, General Secretary and Single Spares Organiser (over a 25 year period).
Now Archivist (but not Machine Registrar), Gauges and Clocks Spares Organiser.
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4701
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: Front Brake Cam Lever
Excellent. Thanks for your help Paul - I will order one.
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Who is online
Users browsing this forum: No registered users and 1 guest