For Sale/swap - primary case inner KH swingarm

[john.nash]

I have now sold my swingarm bike and found some spare primary cases, I must have picked up at some point.
The outer is now sold to Dave Owen but the inner isn't and is off a KH twin (apparantly)

They are not perfect (muck and oil aside).
The oiler bit has broken off, a small part of the rear chain guard is missing, there is small wear from a chain, someone has put in a screw in underneath (for a drain) and one of the screw threads at the bottom of the clutch dome is missing a chunk.

The outer has E9/3001 stamped (which equates to a 5710-54 - single) and the inner K252

Sale (or swap for anything that will move my WNG project along - the list is long ...)

Email address below in my signature thingy.

[dave.owen]

John, I'm interested. But only have a few 350 rings that might be of use and a few valves.
Is it ok to phone

Dave

[john.nash]

Sold to young Dave.....

[john.nash]

The outer is sold but I still have the inner.
This is, allegedly, off a swingarm twin (so not that common)

I'll give it a few weeks here and then EBAY it.

[Simon.Gardiner]

John - I'm interested in the inner (PM sent)

SG

[dave.owen]

I also have a spare kh sa inner, is anyone's interested.
Dave

[Simon.Gardiner]

Dave - is that an inner for a FERC or one of the 54/55 type? (And has it got a casting number??!!)

SG

[dave.owen]

Its for a FERC, K400 K
Dave

[john.nash]

both now sold
thanks.