I've made some progress. I moved the carb forward but had to use 5/16 bolts as the studs would not allow the carb with the flame trap on to be installed.
There is little room left between the flame trap and oil tank maybe 3/16 .
The float bowl from a Lister motor works perfect as this allows the bowl to be positioned away from the flame trap and still clears the Generator.
Should be good for this year.
Backfire
-
- Holder of a Waxed Cotton Anorak
- Posts: 429
- Joined: Tue May 21, 2013 6:46 pm
- Location: Tweed, Ontario, Canada
- Contact:
Who is online
Users browsing this forum: No registered users and 18 guests