wire loom- sq4-1939
wire loom- sq4-1939
HI, I have started to wire my sq4, but the wire diagram that came with the wiring loom is pretty hopeless, and the layout is strange as well. On the loom I bought, I have to connect 2 wires at the voltage regulator, normally that is done a No3 in the headlight, and there is 5 wires connected at the ammeter, I have only worked on bikes that has 2 at the ammeter. Does anyone have a correct wiring diagram to a Ariel sq4 from 1939?.
- Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1142
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: wire loom- sq4-1939
That is the correct diagram for that loom, assuming that the loom also came from Draganfly. The diagram shows 3 wires to the ammeter and 4 to the regulator, all quite standard for most if not all Ariel four strokes. Clearly some confusion.
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
Re: wire loom- sq4-1939
Yes,you are right, I have only worked on old Sunbeams
Who is online
Users browsing this forum: No registered users and 4 guests