Since 2016 I am busy with the restauration of a WNG, which was imported from Myanmar to the Netherlands in 1993. Since then the bike was stored in a barn. In 2015 a friend of me, bought the bike together with a Matchless 3GL from 1943.
The dismantling of the bike is complete now, so from now on I hope to find the spare parts that I need. In the past time I already finished the restauration of the magdyno and the Burman gearbox.
I am looking in these months for parts for the engine, Girder suspension and frontbrake. So if someone can help me further? Please contact me.
Henk van Dijk, Middelburg, The Netherlands.
My 1944 350WNG
-
- Posts: 8
- Joined: Sun Nov 26, 2017 4:05 pm
- Contact:
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4698
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: My 1944 350WNG
Good to hear from you Henk.
There are a few of us here with W/NGs and of course many other Ariels, and shortly you will find that several of our members are in Holland - indeed, our 2018 Annual Rally will be held in Amsterdam.
There are several key suppliers here in the UK, notably our club, Draganfly motorcycles in Suffolk, John Budgen and many others. What are you looking for specifically?
There are a few of us here with W/NGs and of course many other Ariels, and shortly you will find that several of our members are in Holland - indeed, our 2018 Annual Rally will be held in Amsterdam.
There are several key suppliers here in the UK, notably our club, Draganfly motorcycles in Suffolk, John Budgen and many others. What are you looking for specifically?
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
-
- Posts: 8
- Joined: Sun Nov 26, 2017 4:05 pm
- Contact:
Re: My 1944 350WNG
Hi Simon,
Thanks for replying.
I need a lot I think. For the engine following spareparts list sept.1944:
the big end complete no. 1080-29; the timing pinion no. 1770-34; woodruff key's S18-1; small end bush no. 1130-33; circlips no. 1716-31;
lockwasher mainshaftnut no 1299-28.
Frontfork: ballrace crown no.4820-36 (2); 4815-31; 4818-31; 4 bushes 0.608"; star washer.dummy no.no. 4668-35; felt washer no.4838-31 (2)
For the time being till the next fase of my project.
Sincerely yours,
Henk.
Thanks for replying.
I need a lot I think. For the engine following spareparts list sept.1944:
the big end complete no. 1080-29; the timing pinion no. 1770-34; woodruff key's S18-1; small end bush no. 1130-33; circlips no. 1716-31;
lockwasher mainshaftnut no 1299-28.
Frontfork: ballrace crown no.4820-36 (2); 4815-31; 4818-31; 4 bushes 0.608"; star washer.dummy no.no. 4668-35; felt washer no.4838-31 (2)
For the time being till the next fase of my project.
Sincerely yours,
Henk.
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4698
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: My 1944 350WNG
You need to get in touch with Peter Kemp, who looks after singles spares for us. Are you in the AOMCC? His details are in the magazine.
Here's a link to Drags' Web page for single cylinder engines:
https://www.draganfly.co.uk/index.php/a ... 44-singles
Try here too. There are others...
Here's a link to Drags' Web page for single cylinder engines:
https://www.draganfly.co.uk/index.php/a ... 44-singles
Try here too. There are others...
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
-
- Posts: 8
- Joined: Sun Nov 26, 2017 4:05 pm
- Contact:
Re: My 1944 350WNG
Hello Simon,
I am a member of the Dutch Ariel Owners Club. Do I need to be a member of the British Owners Club too? Like to communicate with Peter Kemp.
I did look already on the website of Draganfly.
In my former message I forgot the parts of the frontbrake:
The inner drum is 1 1/8 inch deep. So I am looking for the linings no.4106-32 has to be 7/8 inch wide. With 1/2-inch shoes no.4106 32 to fit on the brake cam no.4115-36 . I also need the return springs no.41110-30; the cam, lever and rod. But the complete anchorplate would also be fantastic.
Regards, Henk.
I am a member of the Dutch Ariel Owners Club. Do I need to be a member of the British Owners Club too? Like to communicate with Peter Kemp.
I did look already on the website of Draganfly.
In my former message I forgot the parts of the frontbrake:
The inner drum is 1 1/8 inch deep. So I am looking for the linings no.4106-32 has to be 7/8 inch wide. With 1/2-inch shoes no.4106 32 to fit on the brake cam no.4115-36 . I also need the return springs no.41110-30; the cam, lever and rod. But the complete anchorplate would also be fantastic.
Regards, Henk.
- Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4311
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
Re: My 1944 350WNG
Hello Henk,
Welcome! and yes, if you like full benefit from the AOMCC you need to become a member.
But most of the talk on this forum goes on in the open area so you can think about it for a while !
W/NG are really nice bikes, ofcourse not for highway use but on twisty roads you can keep up with all of them.
regards, Vincent
Welcome! and yes, if you like full benefit from the AOMCC you need to become a member.
But most of the talk on this forum goes on in the open area so you can think about it for a while !
W/NG are really nice bikes, ofcourse not for highway use but on twisty roads you can keep up with all of them.
regards, Vincent
-
- Posts: 8
- Joined: Sun Nov 26, 2017 4:05 pm
- Contact:
Re: My 1944 350WNG
Hello Vincent,
Thanks for your answer. About 10 years ago I finished my firrst restauration of a BSA M20, which appeared to be a 600 cc.
I enjoy riding on this bike, but are looking forward to experience riding the WNG. It will take some time, but working on the project is also fun.
Regards, Henk.
Thanks for your answer. About 10 years ago I finished my firrst restauration of a BSA M20, which appeared to be a 600 cc.
I enjoy riding on this bike, but are looking forward to experience riding the WNG. It will take some time, but working on the project is also fun.
Regards, Henk.
Who is online
Users browsing this forum: No registered users and 4 guests