WNG Rear Mudguard measures

Pictures of our bikes. W/NG restoration pictures and builds
User avatar
LuisPaz
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 320
Joined: Fri Jan 19, 2018 12:59 am
Location: Argentina
Contact:

Re: WNG Rear Mudguard measures

Post by LuisPaz »

Thank You Johnny!

Today continue with the mobile stays

My read mudguard is Frankestain!

Image

Image

The angle is wrong... needs to be corrected

Image

Image
Luis, from Argentina
1944 Ariel WNG
User avatar
alan.moore
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1457
Joined: Sat Jul 19, 2014 1:29 pm
Location: Leicestershire UK
Contact:

Re: WNG Rear Mudguard measures

Post by alan.moore »

Looking good Luis :D
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single;1952 VHA engined project
http://cloggymoore.wix.com/triumph-pre-unit-6t
User avatar
LuisPaz
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 320
Joined: Fri Jan 19, 2018 12:59 am
Location: Argentina
Contact:

Re: WNG Rear Mudguard measures

Post by LuisPaz »

Thank You Alan!

The screw to join stays to mudguard are 1/4 " diameter , and what thread?

https://www.draganfly.co.uk/index.php/c ... oduct/537-

Regards!
Luis, from Argentina
1944 Ariel WNG
JohnnyBeckett
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2381
Joined: Sat Jul 07, 2018 5:39 pm
Contact:

Re: WNG Rear Mudguard measures

Post by JohnnyBeckett »

HI Luis i think if they look like a fine thread it is 26 TPI CEI ( CYCLE THREAD ) or if it looks like a course thread it is BSW ( WHITWORTH ) that is the common threads that i use on most of my Ariel's some times i find someone has used different type of bolts and screws if they did not have the right ones like the ARIEL i am doing now it got lots of all different types of nuts and bolts with the wrong threads and nut sizes :roll:
User avatar
alan.moore
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1457
Joined: Sat Jul 19, 2014 1:29 pm
Location: Leicestershire UK
Contact:

Re: WNG Rear Mudguard measures

Post by alan.moore »

Luis
26 tpi cycle thread, same as the majority of the fastners.
Cheers
alan
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single;1952 VHA engined project
http://cloggymoore.wix.com/triumph-pre-unit-6t
JohnnyBeckett
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2381
Joined: Sat Jul 07, 2018 5:39 pm
Contact:

Re: WNG Rear Mudguard measures

Post by JohnnyBeckett »

HI most of the bolts and screws are 26 TPI but their is some BA as well on the bike but the engine and gearbox are mostly BSW
User avatar
LuisPaz
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 320
Joined: Fri Jan 19, 2018 12:59 am
Location: Argentina
Contact:

Re: WNG Rear Mudguard measures

Post by LuisPaz »

I need turning the mudguard stay nut..
Can tell me the hexagon size?
Image
Thanks in advance!
Luis, from Argentina
1944 Ariel WNG
User avatar
LuisPaz
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 320
Joined: Fri Jan 19, 2018 12:59 am
Location: Argentina
Contact:

Re: WNG Rear Mudguard measures

Post by LuisPaz »

Today working with Lathe . Nut ready to cut and threading. I think this is NO correct nut to WNG because cannot put the pannier frame bracket.... :roll:
Attachments
WhatsApp Image 2020-06-28 at 18.49.53.jpeg
WhatsApp Image 2020-06-28 at 18.52.02.jpeg
WhatsApp Image 2020-06-28 at 18.45.01.jpeg
WhatsApp Image 2020-06-28 at 19.03.53.jpeg
Luis, from Argentina
1944 Ariel WNG
User avatar
alan.moore
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1457
Joined: Sat Jul 19, 2014 1:29 pm
Location: Leicestershire UK
Contact:

Re: WNG Rear Mudguard measures

Post by alan.moore »

Adrie

Here are the two nuts from my WNG, as far as I know they are original. I had a problem in that with the pannier mounting brackets fitted I could not get a spanner on these nuts as they were too big. I then used two half width normal size 5/16 nuts with washers for the raised part to solve the problem.
SDC13667.JPG
Cheers
Alan
1939 VH Redhunter;1942 RN WNG;1951 Triumph 6T Thunderbird;1970 BSA B175 Bantam;1986 Yamaha SRX600 single;1952 VHA engined project
http://cloggymoore.wix.com/triumph-pre-unit-6t
User avatar
LuisPaz
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 320
Joined: Fri Jan 19, 2018 12:59 am
Location: Argentina
Contact:

Re: WNG Rear Mudguard measures

Post by LuisPaz »

Hi Alan!
Thank you very much for your help!
My head nut have 21/32.... they are a pair of bolts that I found in the waste can!
Luis, from Argentina
1944 Ariel WNG
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest