1928 Model A
- Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4311
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
- Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1142
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: 1928 Model B (Edit Model A it seems now)
The club has many drawings, particularly for the early models, mostly of bought in components. They are all listed on the website or an up to date Excel spreadsheet can be had from me. You will need to be able to find those funny part number thingies though.
Ooh I like this spell checker thing, look I can spell embarrassed now.
Ooh I like this spell checker thing, look I can spell embarrassed now.
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
-
- Posts: 60
- Joined: Fri May 03, 2019 6:26 am
- Contact:
Re: 1928 Model B (Edit Model A it seems now)
Got in contact with Karol Burger. Unfortunately they are not currently shipping to Australia
- Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4311
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
Re: 1928 Model B (Edit Model A it seems now)
I can make a tracing from the ones I have, they are very simple..
if you want that, send me your address via a PM.
if you want that, send me your address via a PM.
-
- Posts: 60
- Joined: Fri May 03, 2019 6:26 am
- Contact:
Re: 1928 Model B (Edit Model A it seems now)
Thanks very much for the offer. A very helpful/kind member has previously sent me tracings of the brackets.
But I am a bit leery of using a bracket I make myself as part of the alignment to reassemble the frame.
Perhaps somebody could comment on the tolerances involved and if I am just over thinking this?
I had also looked at the Slovakian site before but the google translator mostly just broke it
But I know they have a lot of good stuff and parts I am looking for.
What Karol said was he can send all over Europe but not Australia. If the EU now sends to the UK also customs duties.
Also sorry to have taken over this thread with a discussion about where to get 1928 Ariel parts!
But it might be helpful and useful to anybody restoring one of these bikes?
So I wonder does anybody have any suggestion for a service or person I could forward the bracket to in Europe who could then ship it on to me?
I ask because the thing is they have a lot of nice bits in Slovakia and I would gladly pay the extra shipping and of course a fee for that forwarding !
But I am a bit leery of using a bracket I make myself as part of the alignment to reassemble the frame.
Perhaps somebody could comment on the tolerances involved and if I am just over thinking this?
I had also looked at the Slovakian site before but the google translator mostly just broke it
But I know they have a lot of good stuff and parts I am looking for.
What Karol said was he can send all over Europe but not Australia. If the EU now sends to the UK also customs duties.
Also sorry to have taken over this thread with a discussion about where to get 1928 Ariel parts!
But it might be helpful and useful to anybody restoring one of these bikes?
So I wonder does anybody have any suggestion for a service or person I could forward the bracket to in Europe who could then ship it on to me?
I ask because the thing is they have a lot of nice bits in Slovakia and I would gladly pay the extra shipping and of course a fee for that forwarding !
- Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4311
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
Re: 1928 Model B (Edit Model A it seems now)
another '28 is just around the corner.... : viewtopic.php?f=40&t=12083
- Roger Gwynn
- Holder of a Golden Anorak
- Posts: 1142
- Joined: Tue May 28, 2013 11:34 am
- Location: Norwich, UK
- Contact:
Re: 1928 Model B (Edit Model A it seems now)
Ariel, in the main did not list tolerances, not even general ones but a rule of thumb is fractional dimensions are +/- 1/64, which covers 99% of the dims on Ariel drgs. That gearbox plate drawing is available.
You would be best asking for a postal forwarding volunteer from Europe as shipping to the UK would mean UK and Australian customs will take a bite out of your wallet, whereas there woldn't be any customs charge between Karol to anywhere in the EU
You would be best asking for a postal forwarding volunteer from Europe as shipping to the UK would mean UK and Australian customs will take a bite out of your wallet, whereas there woldn't be any customs charge between Karol to anywhere in the EU
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
Re: 1928 Model B (Edit Model A it seems now)
One of the great things about a project is the contacts and friends you make that assist in locating the necessary missing bits.
Regards
Michael.
28 Model A
28 Model C
48 Red Hunter
Michael.
28 Model A
28 Model C
48 Red Hunter
- Karol Burger
- Holder of a Silver Anorak
- Posts: 777
- Joined: Mon Jul 30, 2018 7:08 am
- Location: Rudinka/ Slovensko
- Contact:
Re: 1928 Model B (Edit Model A it seems now)
in this post we published what kind of painting we met at Ariel. Maybe it will help you.
https://www.arielklub.sk/magazin-ake-li ... rieli.html
keep up your work and save another beautiful Ariel motorcycle
https://www.arielklub.sk/magazin-ake-li ... rieli.html
keep up your work and save another beautiful Ariel motorcycle
Ariel 500 E - 1927 /Ariel SF-1931 ,Ariel SB - 1932 / Ariel 4F6 - 1932, 1934 / AOMCC Slovakia Branch Secretary
https://www.arielklub.sk/
https://www.facebook.com/groups/322716757874756
https://www.facebook.com/ArielKlub.sk
https://www.arielklub.sk/
https://www.facebook.com/groups/322716757874756
https://www.facebook.com/ArielKlub.sk
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4698
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: 1928 Model B (Edit Model A it seems now)
Just to add a little to your knowledgebase Karol - my A has a chrome tank (which is mentioned in the despatch record). Alas it has lost all it's paint!Karol Burger wrote: ↑Mon Apr 04, 2022 6:25 am in this post we published what kind of painting we met at Ariel. Maybe it will help you.
https://www.arielklub.sk/magazin-ake-li ... rieli.html
keep up your work and save another beautiful Ariel motorcycle
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Who is online
Users browsing this forum: No registered users and 3 guests