Hi,
Clay at Acme made me some top nuts and I don't recall him charging much extra (if anything) for them when compared to the standard part. Thing is, you can't tell the difference from standard when fitted.
Keith
Two way damping on tele forks
- Keith.owen
- Holder of a Golden Anorak
- Posts: 1210
- Joined: Tue May 03, 2011 2:01 pm
- Location: Bramley, Hamsphire
- Contact:
Re: Two way damping on tele forks
Keith Owen
Editor Cheval de Fer
1950 Rigid Ariel VH
1951 Rigid Ariel NH (under construction)
1973 Norton 850 Commando Interstate
Editor Cheval de Fer
1950 Rigid Ariel VH
1951 Rigid Ariel NH (under construction)
1973 Norton 850 Commando Interstate
Re: Two way damping on tele forks
Can anyone tell me if Paul’s will fit the earlier 46-49 single damping hole tele-forks?
Regards
Michael.
28 Model A
28 Model C
48 Red Hunter
Michael.
28 Model A
28 Model C
48 Red Hunter
-
- Holder of a Golden Anorak
- Posts: 1669
- Joined: Tue Aug 02, 2011 11:37 pm
- Location: South West (Bristol-ish)
- Contact:
Re: Two way damping on tele forks
The only problem you'll have will be the same as with all Ariels - fitting the rods into the top bolts.
People have come up with various solutions - there will have been quite a few discussions on the Forum, over the years.
SG
People have come up with various solutions - there will have been quite a few discussions on the Forum, over the years.
SG
Web admin (webmaster@arielownersmcc.com)
'55 Huntmaster, '56 VH, ' 51 VH, '62 Arrow, '80 R100RT, '00 Sprint ST (now with a new Arrow project, and just now those 4-stroke Ariel parts can't even make one running bike...)
'55 Huntmaster, '56 VH, ' 51 VH, '62 Arrow, '80 R100RT, '00 Sprint ST (now with a new Arrow project, and just now those 4-stroke Ariel parts can't even make one running bike...)
Re: Two way damping on tele forks
Ok thanks Simon.
I found this sketch that deals with the rod attaching issue.
I found this sketch that deals with the rod attaching issue.
- Attachments
-
- 21791729-D321-4156-96F8-0C3987DF36CE.jpeg (43.58 KiB) Viewed 223 times
Regards
Michael.
28 Model A
28 Model C
48 Red Hunter
Michael.
28 Model A
28 Model C
48 Red Hunter
-
- Posts: 54
- Joined: Sat Feb 04, 2017 9:08 pm
- Contact:
Re: Two way damping on tele forks
Put loctite on the bottom nut on the valve, trust me getting it out after it falls off is a right faff!
-
- Holder of a Waxed Cotton Anorak
- Posts: 406
- Joined: Tue Oct 15, 2013 3:07 pm
- Location: Denby Village, Derbyshire.
- Contact:
Re: Two way damping on tele forks
Michael, the fitting of the rod to the top bolt as per the sketch works fine, have been using it for some time with no problems.
John P.
John P.
Who is online
Users browsing this forum: Google [Bot] and 1 guest