1950 SQ4 tank WANTED

Post Reply
kevin.mcdiarmid
Posts: 39
Joined: Fri May 11, 2012 3:17 am
Location: Chilliwack BC Canada
Contact:

1950 SQ4 tank WANTED

Post by kevin.mcdiarmid »

need a fuel tank for my 50 SQ4 or info on who can repair mine, outer shell is removed from bottom and needs new fabricated

for some reason there are no Indian made ones of this size
User avatar
Roger Gwynn
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1113
Joined: Tue May 28, 2013 11:34 am
Location: Norwich, UK
Contact:

Re: 1950 SQ4 tank WANTED

Post by Roger Gwynn »

There are at least 4 on ebay, not quite correct as they all have the speedo cable hole and don't have the correct holes in the panel but the 1st can be ignored and the 2nd can be added. Dunno about fit, quality and threads
https://www.ebay.co.uk/itm/185532013688 ... R9yoiPjWYA
https://www.ebay.co.uk/itm/185531998481 ... R9yoiPjWYA
https://www.ebay.co.uk/itm/165561412447 ... R-KoiPjWYA
https://www.ebay.co.uk/itm/165561410065 ... R-KoiPjWYA
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
kevin.mcdiarmid
Posts: 39
Joined: Fri May 11, 2012 3:17 am
Location: Chilliwack BC Canada
Contact:

Re: 1950 SQ4 tank WANTED

Post by kevin.mcdiarmid »

thanks Roger, i have seen those but they dont look the correct width at the widest part and i think only one of them will post to Canada
i will send them my measurements though and see, i wish i had enough confidence in them to send them mine to reproduce
its a shame that the have the talent to make these but stop short of the quality that i would gladly pay 4 times the amount for
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 2 guests