VH 1956 44-tooth primary chain sprocket

Post Reply
User avatar
Philmynd
Posts: 47
Joined: Mon Mar 14, 2022 12:26 pm
Location: France
Contact:

VH 1956 44-tooth primary chain sprocket

Post by Philmynd »

Wanted:
IMG_20220726_1456321.jpg
44-tooth primary chain sprocket for VH 1956. France, Acknowledgments
User avatar
Philmynd
Posts: 47
Joined: Mon Mar 14, 2022 12:26 pm
Location: France
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by Philmynd »

Hi Members,
I found the 3380-36 sprocket at Draganfly, but can you tell me where to find the center of this sprocket: 3380-05
Thanks
JohnnyBeckett
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2381
Joined: Sat Jul 07, 2018 5:39 pm
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by JohnnyBeckett »

hi you may get one from Greff brown at the AOMCC gearbox spares or try john budgen he has a lot of spares
Simon.Gardiner
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1670
Joined: Tue Aug 02, 2011 11:37 pm
Location: South West (Bristol-ish)
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by Simon.Gardiner »

Philmynd wrote: Thu Jul 28, 2022 6:35 pm ....but can you tell me where to find the center of this sprocket: 3380-05
Phil:
For the Drags sprocket you would usually re-use the centre from your old sprocket (or a spare old sprocket).

SG
Web admin (webmaster@arielownersmcc.com)

'55 Huntmaster, '56 VH, ' 51 VH, '62 Arrow, '80 R100RT, '00 Sprint ST (now with a new Arrow project, and just now those 4-stroke Ariel parts can't even make one running bike...)
User avatar
Philmynd
Posts: 47
Joined: Mon Mar 14, 2022 12:26 pm
Location: France
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by Philmynd »

It is really marked, the surface treatment has disappeared in places :(
Remanufacturing seems obligatory.
Philippe
User avatar
Roger Gwynn
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 1113
Joined: Tue May 28, 2013 11:34 am
Location: Norwich, UK
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by Roger Gwynn »

It looks good to me. If it is the centre where the bearings run that is of concern. It is really hard and not likely to wear as the bearing only operates when the clutch is operated. Any vertical movement in the bearing is usually cured by a new set of rollers.
Roger Gwynn, Membership Secretary, curator of the Machine Register and the works drawings. Director of Draganfly Motorcycles, Craven Equipment and Supreme Motorcycles mostly retired.
User avatar
Philmynd
Posts: 47
Joined: Mon Mar 14, 2022 12:26 pm
Location: France
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by Philmynd »

Trouvé en Grece !!
User avatar
Philmynd
Posts: 47
Joined: Mon Mar 14, 2022 12:26 pm
Location: France
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by Philmynd »

Toutes les pièces sont arrivées, remontage et essais
Attachments
reniflard (1).jpg
IMG_20220829_1600371.JPG
JohnnyBeckett
Holder of a Golden Anorak
Holder of a Golden Anorak
Posts: 2381
Joined: Sat Jul 07, 2018 5:39 pm
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by JohnnyBeckett »

hi when i rebuilt my gearbox and clutch i just fitted new rollers in the basket that i got from the clubs gearbox spares :D i have never needed to change the basket
ariel.andersen
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 426
Joined: Mon Oct 24, 2011 6:41 am
Contact:

Re: VH 1956 44-tooth primary chain sprocket

Post by ariel.andersen »

Hello.
I got this NEW OLD STOCK for sale.
If interest you are welcome to send a PM to:
<ariel.andersen@godmail.dk>
Regards
Jorgen
Attachments
494D16B9-4688-4F8D-92A4-08C77FD22FAA.jpeg
BDE3917C-A991-415C-B710-ACBE45532F70.jpeg
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest