1929/30 girder fork blades
-
- Posts: 22
- Joined: Wed Mar 14, 2012 12:11 am
- Contact:
1929/30 girder fork blades
Looking for set of girder fork blades for 1929/30 Black Ariel in serviceable or repairable condition if anyone has any leads. Many thanks Richard
- Vincent.vanGinneke
- Holder of a Platinum Anorak
- Posts: 4294
- Joined: Sat Apr 09, 2011 12:14 am
- Location: "The Dutch Branch"
- Contact:
Re: 1929/30 girder fork blades
there is a 'wanted' section for this, please. thank you.
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4692
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: 1929/30 girder fork blades
Have you got them, but they are beyond repair?richard.harvey wrote: ↑Thu Jun 09, 2022 5:55 am Looking for set of girder fork blades for 1929/30 Black Ariel in serviceable or repairable condition if anyone has any leads. Many thanks Richard
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
- rein.heerkens
- Posts: 92
- Joined: Fri Feb 18, 2011 9:11 pm
- Location: Dinther, The Netherlands
- Contact:
Re: 1929/30 girder fork blades
Sent you a pm
-
- Posts: 22
- Joined: Wed Mar 14, 2012 12:11 am
- Contact:
Re: 1929/30 girder fork blades
Apologies Vincent for not using "Wanted" section. Have not been on Forum for a while. But just to finish the thread - Simon, I do have the original set and they looked OK; however, close inspection showed cross tube between friction plates bent seizing shaft, one of the friction plates also bent fairly badly and one of the down tubes has been partially replaced using silver solder!! My advice was that whereas it might be possible to repair, it would be a massive job and it might be cheaper and safer to source another. Richard
- simon.holyfield
- Holder of a Platinum Anorak
- Posts: 4692
- Joined: Mon Oct 17, 2011 11:16 pm
- Location: Norfolk
- Contact:
Re: 1929/30 girder fork blades
Did you talk to Jake Robbins?
cheers
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Simes
'51 Square Four,
'58 Huntmaster,
'42 W/NG,
'30 Model A
https://ariel-square-four.blogspot.com
Re: 1929/30 girder fork blades
Moved!!!
(Vincent - 'green names' also have the power.... )
SG
(Vincent - 'green names' also have the power.... )
SG
Administrator
webmaster@arielownersmcc.com
webmaster@arielownersmcc.com
Re: 1929/30 girder fork blades
Maybe we should put Jake Robbins in 'Suppliers'
However, several other forum references including:
viewtopic.php?f=7&t=11911&p=83466&hilit=jake#p83466
SG
However, several other forum references including:
viewtopic.php?f=7&t=11911&p=83466&hilit=jake#p83466
SG
Administrator
webmaster@arielownersmcc.com
webmaster@arielownersmcc.com
Who is online
Users browsing this forum: No registered users and 2 guests