Wanted parts for Black Ariel ‘27 or 28

MGriffin
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 233
Joined: Sun Oct 06, 2019 1:04 pm
Contact:

Wanted parts for Black Ariel ‘27 or 28

Post by MGriffin »

Any Fork Parts - Found✔️
Front Chain Cover - Found ✔️
Front Hub - Found ✔️
Rear Hub - Found ✔️
Clutch (any of the parts) - Found ✔️
Q Gearbox or parts - found ✔️ but happy to consider spares
Magneto - Found ✔️
B&B Carburettor ✔️
Mudguard stays ✔️
Handle Bar - still searching
Seat frame complete or parts - still searching
Thanks
Michael
Last edited by MGriffin on Wed May 18, 2022 11:46 pm, edited 5 times in total.
Regards
Michael.

28 Model A
28 Model C
48 Red Hunter
tony.barnett
Holder of a Waxed Cotton Anorak
Holder of a Waxed Cotton Anorak
Posts: 513
Joined: Thu Mar 10, 2011 6:19 pm
Location: Swindon, UK
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by tony.barnett »

Be aware that some 27 and 28 parts look the same, but are very different - for example the forks are much narrower on the 27, and likewise the front hub. Interchangeable as an assembly I'd think, but not as parts.
KOBI
Swindon Branch Secretary
Ariels - 1913 TT Model, 20 Roadster, 28 Model D, 30 Model B, 38 VH, 52 VH
Velocette MAC, KSS Mk1
User avatar
Karol Burger
Holder of a Silver Anorak
Holder of a Silver Anorak
Posts: 771
Joined: Mon Jul 30, 2018 7:08 am
Location: Rudinka/ Slovensko
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by Karol Burger »

I sent you a message
Ariel 500 E - 1927 /Ariel SF-1931 ,Ariel SB - 1932 / Ariel 4F6 - 1932, 1934 / AOMCC Slovakia Branch Secretary


https://www.arielklub.sk/
https://www.facebook.com/groups/322716757874756
https://www.facebook.com/ArielKlub.sk
MGriffin
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 233
Joined: Sun Oct 06, 2019 1:04 pm
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by MGriffin »

tony.barnett wrote: Fri Feb 11, 2022 9:47 am Be aware that some 27 and 28 parts look the same, but are very different - for example the forks are much narrower on the 27, and likewise the front hub. Interchangeable as an assembly I'd think, but not as parts.
Thanks Tony yes i’m learning these things.
Karol is also being veru helpful and i thank him for that.
M.
Regards
Michael.

28 Model A
28 Model C
48 Red Hunter
MGriffin
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 233
Joined: Sun Oct 06, 2019 1:04 pm
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by MGriffin »

Still looking for a Rear Hub if such a thing still exists.
refer to picture
M.
Attachments
D3C74672-BB53-4B46-9EAC-4196124119C6.jpeg
Regards
Michael.

28 Model A
28 Model C
48 Red Hunter
User avatar
Vincent.vanGinneke
Holder of a Platinum Anorak
Holder of a Platinum Anorak
Posts: 4294
Joined: Sat Apr 09, 2011 12:14 am
Location: "The Dutch Branch"
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by Vincent.vanGinneke »

apart from the teeth, whats wrong with this one ? it looks o.k.
Karol has new sprockets with a 'step' in it that can be used on these hubs after grinding the old teeth off.
like this :
rear wheel sprocket fitting  (6).jpg
rear wheel sprocket fitting  (5).jpg
rear wheel sprocket fitting  (4).jpg
rear wheel sprocket  (1).jpeg
MGriffin
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 233
Joined: Sun Oct 06, 2019 1:04 pm
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by MGriffin »

Vincent.vanGinneke wrote: Sun Feb 27, 2022 11:28 pm apart from the teeth, whats wrong with this one ? it looks o.k.
Karol has new sprockets with a 'step' in it that can be used on these hubs after grinding the old teeth off.
like this :

rear wheel sprocket fitting (6).jpgrear wheel sprocket fitting (5).jpgrear wheel sprocket fitting (4).jpgrear wheel sprocket (1).jpeg
I wasnt of the impression that the pictured rear hub above was available to buy.
I thought that hub which is on the Klub Slovakia Webpage was being used to demonstrate Karol’s new rear sprockets and how they are installed. Its also missing the RH spoke anchor hat.
I shall have to ask. Thanks Vincent.
Michael
Regards
Michael.

28 Model A
28 Model C
48 Red Hunter
User avatar
Vincent.vanGinneke
Holder of a Platinum Anorak
Holder of a Platinum Anorak
Posts: 4294
Joined: Sat Apr 09, 2011 12:14 am
Location: "The Dutch Branch"
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by Vincent.vanGinneke »

When lacing the wheels on these Black Ariels the anchor hat needs to be loose as otherwise you cannot get the spokes in.
Later Ariel used a 'keyhole' there + a fixed anchor hat.
On the later ones you can hook in the spokes without the need to start with a separate hat with the spokes hung in it.
MGriffin
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 233
Joined: Sun Oct 06, 2019 1:04 pm
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by MGriffin »

Vincent.vanGinneke wrote: Tue Mar 01, 2022 8:29 am When lacing the wheels on these Black Ariels the anchor hat needs to be loose as otherwise you cannot get the spokes in.
Later Ariel used a 'keyhole' there + a fixed anchor hat.
On the later ones you can hook in the spokes without the need to start with a separate hat with the spokes hung in it.
Thanks for explaining that Vincent.
MG.
Regards
Michael.

28 Model A
28 Model C
48 Red Hunter
MGriffin
Holder of a Nylon Anorak
Holder of a Nylon Anorak
Posts: 233
Joined: Sun Oct 06, 2019 1:04 pm
Contact:

Re: Wanted parts for Black Ariel ‘27 or 28

Post by MGriffin »

The B&B Carburettor I’m looking for.
Attachments
093054CC-4CEA-459B-9A81-79955057AD0F.jpeg
093054CC-4CEA-459B-9A81-79955057AD0F.jpeg (24.33 KiB) Viewed 848 times
Regards
Michael.

28 Model A
28 Model C
48 Red Hunter
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 1 guest